Engine Build Sheets

[LitemUp]

Ok, I wanted to start this thread in order for those that want to build there motors have a place that they can reference. I'm looking from input for those that have already built their enigne to provide details of there build (ie. rods, pistons, rings, lifter, cams, pushrods, springs, retainers, mains, bolts, studs etc.) basically every they used for their build. Also Iwould like for you to mention:

Who did the machine work?
Who built the motor?
Who installed the motor?
Who tuned the engine?

Also please mention what your build was designed for FI, NOS, N/A, as well as HP level the engine was built for.

Please no highjacking this thread with unrelated topics.

 

[yellowfever#154]

Some of that stuff maybe hard to pry out of people. Especially cam specs.

Machine work - AMS Engines
Assembly - AMS Engines
Install - Me
Tuning - Yet to be done, but will be Rottenronnie and Toma

Mine was built for 1000+ hp and was designed for F/I. The only other thing to make mine stronger that I didnt do was thicker liners.

AMS Engines.com

 

[05srt10carson]

What kind of piston did you use
This is what I got
Valve spring comp
Billet mains cap
K1 rods
Need good piston for F/I
Is this a good set up