SRT911
Full Access Member
Hi,
first the good news: Today i was with a friend on a drift-training-event. We had a great time. We've made that kind of training several times in the last years, but today i'm glad, because now i learned to drift through the complete length of long turns. The track was made wet, i hope that i will learn the same for dry tracks in the future.
Now my problem: The way to the event and back i made with my SRT10. After a few miles on the German autobahn the engine light came on, and with the key on-off-procedure i found out the error P0202 - Control Circuit An open or shorted condition detected in control circuit for injector #2 or the INJ 2 injector bank. On the way back from this event the engine light first remained off but came on after a few minutes again.
The engine is still running like before, i hope that it is an electrical contact problem only. Where can i find the control circuit and where are the contacts at the injectors?
Hope, you can help me.
Best regards
SRT911
P.S. I've made a forum search for P0202 but got no result, however i found the following posting by google:
http://www.vtcoa.com/forums/showthread.php?t=11
Why do i not get it by forum search?
first the good news: Today i was with a friend on a drift-training-event. We had a great time. We've made that kind of training several times in the last years, but today i'm glad, because now i learned to drift through the complete length of long turns. The track was made wet, i hope that i will learn the same for dry tracks in the future.
Now my problem: The way to the event and back i made with my SRT10. After a few miles on the German autobahn the engine light came on, and with the key on-off-procedure i found out the error P0202 - Control Circuit An open or shorted condition detected in control circuit for injector #2 or the INJ 2 injector bank. On the way back from this event the engine light first remained off but came on after a few minutes again.
The engine is still running like before, i hope that it is an electrical contact problem only. Where can i find the control circuit and where are the contacts at the injectors?
Hope, you can help me.
Best regards
SRT911
P.S. I've made a forum search for P0202 but got no result, however i found the following posting by google:
http://www.vtcoa.com/forums/showthread.php?t=11
Why do i not get it by forum search?
Last edited: