Exhaust combo???

[pm.racing]

Just the Cold air intake, i'm looking for a sct tuner..I had to spend a wad chasing the oem Nightrunner tonneau cover... and then billet antenna, locking tailgate, new pioneer nav system.....so running up the bill pretty quickly

 

[VIPER]

you should get an SCT and Tuned 1st - IMHO then start you mods,

TB - headers - exhaust - shift kit - trans mod ect....

by far the SCT will be the biggest mod you notice,... i would start there

good luck

 

[10banger]

I am probably looking at the B&B cat back and mid pipes or the magna flow and the B&B mid pipes....It looks like the headers will come later .... I just want to get as much as I can as fast as I can before the wife says enough lmao

B&B mids are only compatible with B&B headers.... just FYI. The B&B catback is compatible to JMB's mids or Mopar's mids.

 

[10banger]

you should get an SCT and Tuned 1st - IMHO then start you mods,

TB - headers - exhaust - shift kit - trans mod ect....

by far the SCT will be the biggest mod you notice,... i would start there

good luck

Shouldn't you do the SCT after those mods since eventually you will have to get it tuned again?

 

[pm.racing]

I am not really going to go past the sct and exhaust...I will probably get the NOS kit later but that will probably be it...lol probably...I saw the custom direct port NOS and got a stiffy... but before I will just get the regular nescessary upgrades that the guys advise on the site, like oil catch can other small stuff....

 

[VIPER]

Shouldn't you do the SCT after those mods since eventually you will have to get it tuned again?

lol - just with a CAI and exhaust - no, and most tuners give you FREE support after you buy the tune.... as long as you dont do anything major

so even if you get ur tuner and get you truck tuned - and mod it and needs to be retuned it should not cost you ne thing

and with the exhaust he will need the SCT b4 - bc of the catless mids

 

[pm.racing]

So what mids are compatible to the magna flow??

 

[VIPER]

I am not really going to go past the sct and exhaust...I will probably get the NOS kit later but that will probably be it...lol probably...I saw the custom direct port NOS and got a stiffy... but before I will just get the regular nescessary upgrades that the guys advise on the site, like oil catch can other small stuff....

i remember 5 or 6 yrs ago i said the same thing, jsut a few mods lmao - once you start you wont stop

becareful with NOS DP you might hurt you engine "stock" try a 100 shot tapped into the intake or a 150 shot tapped into a TB spacer ect....

so you let the air mix with the NOS b4 it hit the intake - just alittle advise

 

[VIPER]

So what mids are compatible to the magna flow??

mids with no headers ? your keeping the stock manifolds ?

if so - no mids needed just take it to a exhaust shop and have them cut the 2 rear cats off "leave the o2 in" remove the stock muffler and weld in a mangaflow ... and your good to go

 

[pm.racing]

I appreciate, yea i couldnt see going over 150.. I spray 275 on my Mustang and push 23 pounds of boost on the other Mustang... but with the SRT i just want a nice street rod not a 8 sec terror lmao

 

[10banger]

lol - just with a CAI and exhaust - no, and most tuners give you FREE support after you buy the tune.... as long as you dont do anything major

so even if you get ur tuner and get you truck tuned - and mod it and needs to be retuned it should not cost you ne thing

and with the exhaust he will need the SCT b4 - bc of the catless mids

Lol, don't have the SCT - that's why I asked.

 

[pm.racing]

Well im going to get the headers just not a fast as I thought... maybe at the first of the year or a little later...

 

[VIPER]

Well im going to get the headers just not a fast as I thought... maybe at the first of the year or a little later...

thats the story of my life lol

 

[10banger]

So what mids are compatible to the magna flow??

These:
http://jmbperformance.com/store/product_info.php?cPath=66_113_94&products_id=273

Justin is a supporting vendor of the forum and has top of the line shit. You will not be disappointed.:rock:

 

[pm.racing]

I just found the JMB site and I had also spoke to JTS earlier this morn and he had pretty good advice.. He had some pics from where someone used the BB mids and the magnaflow cat back...the muffler shop had to create and bend to make it work...Thats why I hoping to find mids that just bolted up to the magna cat back...

 

[VIPER]

I just found the JMB site and I had also spoke to JTS earlier this morn and he had pretty good advice.. He had some pics from where someone used the BB mids and the magnaflow cat back...the muffler shop had to create and bend to make it work...Thats why I hoping to find mids that just bolted up to the magna cat back...

i have Mopar mid's going to up for grabs with QTP elec cutouts,.. that are bolted up to my Mangaflow system

only 1 thing tho - there for mopar long tubes,.. so if you keep the stock manifolds they will needs to be mod;d

 

[10banger]

i have Mopar mid's going to up for grabs with QTP elec cutouts,.. that are bolted up to my Mangaflow system

only 1 thing tho - there for mopar long tubes,.. so if you keep the stock manifolds they will needs to be mod;d

I thought you already sold those:dontknow:

 

[10banger]

I thought you already sold those:dontknow:

Nevermind, just went back to your post.... they are still up for sale.

 

[pm.racing]

That would be sweet but just a little much modding for me... I just want to bolt on with the SRT sweet simple.....I hope

 

[VIPER]

Nevermind, just went back to your post.... they are still up for sale.

nah - i was sellin them, but the supercharger will not be ready till nov - so im goiing to wait till after the car sho them relist everthing and then some