extra mufflers

[belgiumbarry]

ok guys, as i finded the new B&B exhaust to loud ( can't hear my radio anymore and driving it for a hour makes me )

i will put 2 extra mufflers ( the ones straight trough , dia 3" ) on the pipes coming over the axle .They will be in place from the ex spare wheel.
From there i route bends to end with the B&B tips in place as they were.

Maybe :dontknow: i loose some HP ... but what the hell, i have enough horses :elefant: :elefant: :elefant: :elefant:

will post here some pics as install progress.... and promise not that long as the ROE install...

finally ofcourse a passing by audio vid :rock: :rock:

so those pipes are going to be cut in pieces !

 

[ZCx]

magnaflow?????

 

[belgiumbarry]

magnaflow?????

no, bought them at local sports exhaust shop...must look for the brand ...
pipe 3" , body 6" , length about 24"...
polishd stainless :elefant: :elefant: :elefant: :elefant:

 

[RAMviperIFFIC]

Look forward to seeing your install!

I too, recently found my catless, full 3" magnaflow exhaust to be too loud. I bought 2 "Silver Bullets" which are 3" inlet, 3" outlet, directional straight through mufflers. I had them put in the catless mid-pipes which I got from JMB. Noise was substantially reduced at idle up to around 4,000 rpm, but it did not quiet down the top end at full throttle! It's purrrrrrrrrfect now.

 

[belgiumbarry]

I too, recently found my catless, full 3" magnaflow exhaust to be too loud. I bought 2 "Silver Bullets" which are 3" inlet, 3" outlet, directional straight through mufflers. I had them put in the catless mid-pipes which I got from JMB. Noise was substantially reduced at idle up to around 4,000 rpm, but it did not quiet down the top end at full throttle! It's purrrrrrrrrfect now.

great :rock: do you have pics ?

i have the Hiflow cats so no place at all for extra mufflers....except in the rear , in the spare wheel room...

think doing it on monday ... :elefant:

 

[sleeper]

ok guys, as i finded the new B&B exhaust to loud ( can't hear my radio anymore and driving it for a hour makes me )

i will put 2 extra mufflers ( the ones straight trough , dia 3" ) on the pipes coming over the axle .They will be in place from the ex spare wheel.
From there i route bends to end with the B&B tips in place as they were.

Maybe :dontknow: i loose some HP ... but what the hell, i have enough horses :elefant: :elefant: :elefant: :elefant:

will post here some pics as install progress.... and promise not that long as the ROE install...

finally ofcourse a passing by audio vid :rock: :rock:

so those pipes are going to be cut in pieces !

View attachment 24330

Its a shame your going to cut up such a beautiful and expensive exhaust system. Oh well, good luck I hope you accomplish what you going for. At least your using polished mufflers.

 

[belgiumbarry]

Its a shame your going to cut up such a beautiful and expensive exhaust system. Oh well, good luck I hope you accomplish what you going for. At least your using polished mufflers.

gonne keep the damage to a minimum... let it perfect TIG welded and polish...

 

[nycstev]

I am doing the same thing. Will be putting in a set of AeroTurbine 3" resonators http://www.aeroexhaust.com/truck_resonator_ar30.html

 

[belgiumbarry]

I am doing the same thing. Will be putting in a set of AeroTurbine 3" resonators http://www.aeroexhaust.com/truck_resonator_ar30.html

that will be about the same setup Steve :rock: ...pics please

 

[mauiSRT/10]

I understand Barry. Rarely do I drive more than an hour at a time..............if I did, I would not have my catless setup as it does grate on you. My gf thinks its too loud now.

Remember all Nascar drivers wear earplugs!!! LOL


patrick

 

[Annu Kumar]

Looking good Barry

 

[belgiumbarry]

Looking good Barry

i didn't posted pics yet !

 

[attila]

if your pipes are too loud.... you are too old!:dontknow: :elefant:

 

[belgiumbarry]

if your pipes are too loud.... you are too old!:dontknow: :elefant:

:thefinger: :thefinger: :thefinger:

PS i don't need noise to impress....

 

[belgiumbarry]

some pics of the first try-out "presentation" ... welding will be for tomorrow as a engineer had to make a visit and so myself better stayed at the office ...




i know, i know... bolts are to be replaced by exact lenghts...

 

[amtrucker22]

dayum those are big! Can't wait for the sound clip...

 

[sleeper]

What brand are the muffs? There pretty cool looking.

 

[VIPR PWR]

insulating the cab area might have helped----damn looks like to big shiny atomic bombs ---hope it sounds good....can't wait to hear it..

 

[Yellow venom]

What brand are the muffs? There pretty cool looking.

:ditto:

 

[Floor]

these are huge !! :stupid:
Curious about the sound....:driver: :thrasher: