Factory tonneau cover
- Thread starter SRT-10
- Start date
SRT-10 said:
there are 2 number:
this is the cover zf27tzzab
the book says this is the install kit with spoiler 82210067
call me if i can help 623.298.1183
There is no kit for the top. Each individual peice has a part number. You will not find the strikers listed either. They are the same as the tailgate strikers. It will cost you around 4 grand to put it together.
Good luck
Good luck
ViperPoweredRam
Full Access Member
- Joined
- May 19, 2006
- Messages
- 252
- Reaction score
- 0
what would the price of a factory tonneau be
hemi killer said:
this is a complete kit the 2 part number will make up all the hardware you will need. this is about $2900.00 (this is the price you should get at other dealers). i can get it for about 2300.00. this comes primed and will need paint.
:rock:
DING DING!!!
WINNER ROUND ONE GOES TO............................DRAGON!!!!
WINNER ROUND ONE GOES TO............................DRAGON!!!!
Very good to hear. I bought one off of Ebay and needed several parts to complete. At the time I was told it was not a kit.
$2300.00 is a lot cheaper.
$2300.00 is a lot cheaper.
hemi killer said:
ya these are brand new numbers. so not many other dealers know about them yet.
Nowwhat
Full Access Member
:star:
I heard production problems....and they had to redesign the wing....
SRT-10 said:
I heard production problems....and they had to redesign the wing....
SRT-10 said:
If you take a look the the wing on the later trucks with the cover is considerably different. When they tried the standard wing on the cover it created lift, not down force. They had to do considerable redesign and windtunnel testing to address this issue.
Anyway, that was the scuttlebutt on the web as to why it took so long.
Venom Power
Full Access Member
SRT-10 said:
Dumb ass dealership?!?!? Now THAT'S original..
OCBob
VIPER POWERED
There are 2 hinges that mount at the front of the bed and the 2 shocks that mount in the rear. Sounds like you didn't get the front hinges.
OCBob
VIPER POWERED
That should be all you need to install it.
There are 2 support brackets that mount in between the bed and the cab that are rivited to the inside of the bed for support.
There are also support pieces for the strut mounts on either side of the rails by the tail light assembly. I needed to order several pieces when I installed my factory cover for my Black RC.
Nowwhat said:
yes it was a problem!
they seen Nowwhat's truck and said " we have a problem "!!!!
I'm missing the reinforcement brackets that go between the cab and the bed. Anyone know where I can get just the reinforcement brackets. The dealership keeps trying to sell me the $1000 kit, even though I'll end up with duplicate parts, except for the rein. brackets.
Support Us
Become A Supporting Member Today!
