Discussion in 'General Discussion' started by Bobby S, Jun 6, 2018.
Any knowledgeable technicians near Old Bridge NJ
Based on the fact that you said your truck was running around 230/240 which is already hot. Mine never goes past 200 even in 97 degree weather with the stock man. I do have a tune.
I know there are srt-10 owners in NY/NJ i know of one dude on instgram who lives in NY who has alot of work done to his truck (QC with 6 speed swap, built motor etc). I thought he had his work done in NY/NJ turns out he used a shop in CT called Plus Zero Motorsports.
Anyone know of cylinder heads availability. Dodge does not have as usual.
You can pretty much rule out a Dodge dealership for any help at this point. Your going to have to go to viper orientated websites like jtsvp, roe racing, etc. Start calling them, they should be able to source what your looking for at the very least.
Have seen them on ebay and X2Builders.
If you are in no hurry, I believe I have a set of G3 heads up in NY, and can ship with gaskets and all that to get it back on the road. I wont be back up in NY until August however.
Are you positive you need a new set of heads?
This is what I am being told. I will probably get second opinion if possible. I am not mechanically inclined as so many of other members are here, so I am at major disadvantage.
I would definitely get a second or third opinion.
You are in the NY area.. there has to be some independent speed shop in NY that may have knowledge on the gen3 viper motor?
Keep us in the loop.
Taking truck back from useless Dodge dealership. Looks like I'll be sending cylinder heads and engine out to be re-built. Glad I have Warranty!
Separate names with a comma.