GADodgetech said:
Alright see one lightning seen em all, but the model you have in your pics. Feel free to post some more!!!!!
My wife tends to get that a lot, lol. Thats why I send her on my parts and tool errands. she seems to get instant service, where as my skinny dumb gobber looking as has to wait hours before someone even says "can I help you?"
FATJACK said:
Welcome, You Lightning guys are easier to take than the Hemi guys, we have a couple of them on here that are all mouth and no ass!!
LOL.... we get a few Hemi guys like that as well... They dont seem to come back to often anymore.
kickinassrt-10 said:
and the way people are wrecking 10's they're falling off the map like flys....
Also Shaggy.....damn fine Truck, and lady!!!!
LOL, so true, that guy flipping his SRT-10 was so epic it even made it into the newest Lightning video, right at the end. lol
Here's the video if any of you care to watch, lol. (you could always fast forward to the end.
http://videos.streetfire.net/video/Harley-Davidson-F150-and_712922.htm
Begood said:
Welcome, if you are into hi-performance this place is for you.
Bill.
Big time into High Performance. Been racing for almost 20 years now.
Actually ripping off the 2 1/2" exhaust system next weekend, and putting on a full 3" system.
Here's my tiny mod list on the truck so far:
Block 5.4 Iron 90mm
Steel Crank 5.4 Ford Lightning
Main Brgs. Clevite
Rod Brgs. Clevite
Pistons Manley
Total seal AP rings
5.4 Con Rods Billet I 2000 Oliver
Main Studs ARP 8740 ARP
Melling billet oil pump
Rear seal- OEM
Rear seal carrier
Seal carrier bolts-5
L&M Engines/Diamond Custom pistons – Over .300†thick top, ring .300†below, 5.4 deck height .010†not .120â€, Skirts coated, Domes coated, tool steel pin, offset pins.
TEA STAGE III 2V ALUMINUM HEADS
ALL NEW:
Timing chains
Tensioner's
Guides
Gaskets
Front crank seal
STAGE II BULLET CAMS
Sprockets and spacers
Lifters
Rockers
ARP Head studs
10# LOWER PULLEY
LFP AUXILARY PULLEY TENSIONER
SCT XCAL 2 Programmer
SNIPER TUNING SYSTEM SPECIAL FORCES/COMMANDO
ACCUFAB POLISHED SINGLE BLADE THROTTLE BODY
WHIPPLE 2.3 SUPERCHARGER
3.24 UPPER PULLEY
NX WET KIT 75 SHOT
TB NITROUS SPACER
SCT BA3000 MAF
JLP VALVE BODY & DEEP SUMP PAN
JLP TRACTION BARS
FORD RACING VALVE HEAD FILTERS
OIL SEPERATOR
CUSTOM 3PC. 22" SYMBOLIC WHEELS (22X10 FRONT 22X11 REAR)
PIRELLI SCORPION ZERO ASY TIRES
2 EXTRA 22X10 SYMBOLIC RIMS.
QA1 REAR SHOCKS
WESTERN CHASSIS LOWER CONTROL ARMS
EIBACH SPRINGS
JLP REAR ADJUSTABLE DROP SHACKLES
GATORBACK BELT
BASSANI CAT-BACKEXHAUST
ROTOR PROS CROSS DRILLED SLOTTED ROTORS
DRIVE SHAFT SAFETY LOOP
ALL FEL PRO GASKETS
McCulloch HID KIT
10,000K HEADLIGHTS
8,000K XENONS FOGS
SPEEDSTER BED COVER
PIONEER DVD/NAVI/XM HEAD UNIT
AUTOMETER LUNAR GAUGES temp,trans
AEM WIDEBAND
COLOR-MATCHED WINDSHIELD WIPER VALENCE & SMOOTH STEPS
CHROME BILLET GRILL
1-PIECE CLEAR HEADLIGHTS
BILLET LICENSE PLATE
CHROME GAUGE COVER
LIMO TINT
16" AR BAJA REAR RIMS WITH 28" HOOSIER SLICKS
(4) 1999 Ford Lightning 18" rims painted black with Nitto 555R's on rear and Nitto 555's up front.
Once again, real nice to meet all of you, and hopefully I can get together sometime in the future and have some friendly runs in at the track. :rock:
Oh and since you seemed to like the wife n truck.
Here's a few more, lol.