Gauges

[LitemUp]

What gauges are you guys using for A/F, Boost, Nitrous, Fuel presure?

I've seen a lot of you using AEM wide bands for the A/F, and I've also seen some Mopar SRT gauges as well.

For you guys that are running superchargers what are the gauges that your using?

 

[RedSrt007]

I used the 3-Pod....factory oil temp, air/fuel (aem), and Boost

 

[Stingray]

For my WB I used the Wideband Commander from Dynojet and a Autometer FP gauge. I wanted to match my original cluster.

 

[Dave T(BADVENM)]

I used the 3-Pod....factory oil temp, air/fuel (aem), and Boost

same here as redsrt007.

http://www.vtcoa.com/forums/attachment.php?attachmentid=12713&d=1176587345

 

[tinygiants]

For my WB I used the Wideband Commander from Dynojet and a Autometer FP gauge. I wanted to match my original cluster.

I like the steering column gage pod. Where can I find one like that?

 

[Stingray]

I like the steering column gage pod. Where can I find one like that?

Autometer http://www.autometer.com/cat_mountsdetail.aspx?vid=45&sid=0&mid=3&pg=1&mdl=62&gw=4
The fit wasn't too bad either.

 

[JTS VENOM PERFORMANCE]

I got oil temp,boost,aem A/F inside

fuel pressure,mech oil pressure,water temp mounted on cowl of windshield

 

[Ram From Hell]

What gauges are you guys using for A/F, Boost, Nitrous, Fuel presure?

I've seen a lot of you using AEM wide bands for the A/F, and I've also seen some Mopar SRT gauges as well.

For you guys that are running superchargers what are the gauges that your using?

Using all FJO gauges (methanol, but no NOS):

http://www.fjoracing.com/products/gauges/

Boost, AFR, IAT (intake air temp), fuel pressure, methanol injection pressure, intercooler fluid temp.

 

[NBT]

I need installation instructions and wiring diagrams for the tripple pillar, aem, and gauges.(see below) I have not surfed the MFG website for directions yet. I have a used set of these that need to be installed on my truck (not that I can install them yet)...and I need install tips and directions.

Red, I did see your install, and I believe that is the layout of the gauges I will be doing on mine.:dontknow: yet.

Any advice would be appreciated.

 

[nycstev]

Where do yo get this tripl setup that gos on the door frame?

 

[NBT]

Where do yo get this tripl setup that gos on the door frame?

There are a few places to get them... I am pretty sure we have a vendor here that can get them... Earl will probably get one posted up that he found while surfing e-bay.


Never knew they made a double:dontknow:
http://cgi.ebay.com/ebaymotors/AUTO...3QQihZ017QQcategoryZ43951QQrdZ1QQcmdZViewItem

I was lucky enough to get these some time ago, through forum member's that were getting rid of them. (The AEM, and Fuel Pressure gauges are unused)Just never had the time to get them in. I was dealing with a host of other issues, hell I still have the Raptor shift light sitting here from a prior group buy.



NOT SURE about this site, but it came up on a quick search I did...
http://www.glowshiftdirect.com/index.asp?PageAction=VIEWCATS&Category=19
someone will have a better contact, and chime in.