Gear ?

[cyalata]

trying to figure out what the best gear to put in the ram it will have 24 inch rims on it so that might have to go into consideration

 

[Dom426]

3.73s for me

 

[includemeout]

http://www.gounitrax.com/formulas.htm

 

[viperhauler]

488's

 

[FATJACK]

How tall are your new tires?, 32" or less you should be fine with the 4.56's

 

[viperhauler]

if the 22's are 31.5, then it's gotta be at least 33...i think...

 

[cyalata]

How tall are your new tires?, 32" or less you should be fine with the 4.56's

new tires are 305/35/24 dont know the height im not good at fig that out and havent had them mounted due to rim painting

 

[BurntRubber]

456

will always work for a qc.


also are you putting a different s/c on your truck? dont see the need for a 522 with a roe unit

 

[FATJACK]

new tires are 305/35/24 dont know the height im not good at fig that out and havent had them mounted due to rim painting

Got a tape meaasure??? Damn, do I have to do everything for you???

 

[cyalata]

Got a tape meaasure??? Damn, do I have to do everything for you???

tires arent here yet bud there still at the tire shop lol but i do appreciate the help:rock:

 

[FATJACK]

tires arent here yet bud there still at the tire shop lol but i do appreciate the help:rock:

Just BS'in you Brother.

 

[BurntRubber]

your going to gain about an inch...which most guys could use.

jack would do it if he could gain 4"s....hahahaha

 

[Trainman]

new tires are 305/35/24 dont know the height im not good at fig that out and havent had them mounted due to rim painting

305-35-24 works out to about 32.4" tall, your speedometer will read a little slow....but then again you won't put as much mileage on the truck:rock:

 

[FATJACK]

your going to gain about an inch...which most guys could use.

jack would do it if he could gain 4"s....hahahaha

4" my ass, I would do it for a 1/2"