Gibson Headers Installed

[SlvrSnake]

Intalled these Headers back in Feb 08. Never posted pics after I did it. Just wanted to say thanks to those who helped me out with questions. Especially JRSVIPR. Without his input the stainless headers would have melted all kinds of stuff. So far so good with the Jet-Hot coating, nothing is melting, even with 97 degree heat. Thats all, here are a couple pics.

 

[TNVIPER]

Look great!!..:rock: ...2 things though...get rid of the blue ties and get black ones....turn the Mobile oil filler cap one-half turn....

 

[Prof]

Better yet, replace the oil filler cap with a Roe Breather...

http://www.roeracing.com/ProductCart/pc/viewPrd.asp?idcategory=64&idproduct=245

 

[SlvrSnake]

Somehow I knew that the ties and oil cap were going to bother someone. The one blue tie is also too long and I did not trim it. I am so lazy

I have this oil cap but don't want to shit it up so I have not put it on yet.

http://www.theviperstore.com/Pictures_Viper3_Oil_Filler_Cap.htm

 

[Prof]

Somehow I knew that the ties and oil cap were going to bother someone. The one blue tie is also too long and I did not trim it. I am so lazy

I have this oil cap but don't want to shit it up so I have not put it on yet.

http://www.theviperstore.com/Pictures_Viper3_Oil_Filler_Cap.htm

Now that is hot!

 

[SlvrSnake]

Thanks Prof, it looks good sitting in the box :marchmellow:

 

[TNVIPER]

Somehow I knew that the ties and oil cap were going to bother someone. The one blue tie is also too long and I did not trim it. I am so lazy

I have this oil cap but don't want to shit it up so I have not put it on yet.

http://www.theviperstore.com/Pictures_Viper3_Oil_Filler_Cap.htm

...:rock:

 

[moparracing]

Intalled these Headers back in Feb 08. So far so good with the Jet-Hot coating, nothing is melting, even with 97 degree heat.

i thought it was mainly bassani shorties that was having that problem......

setup looks good !!:burnout:

 

[SANCHOBA]

OMG! you didn't replace the bolts with some stainless ones?:bawling: with the jet-hot coating you could get rid of those fugly heat shields.

 

[JRSVIPR]

Intalled these Headers back in Feb 08. Never posted pics after I did it. Just wanted to say thanks to those who helped me out with questions. Especially JRSVIPR. Without his input the stainless headers would have melted all kinds of stuff. So far so good with the Jet-Hot coating, nothing is melting, even with 97 degree heat. Thats all, here are a couple pics.

View attachment 27593View attachment 27596

The headers look great with Jet-Hot on them,Glad i could help bro.:rock:

 

[SlvrSnake]

The headers look great with Jet-Hot on them,Glad i could help bro.:rock:

No problem, I had to give you credit where credit was due :congrats:

 

[Demon 8]

OMG! you didn't replace the bolts with some stainless ones?:bawling: with the jet-hot coating you could get rid of those fugly heat shields.

I didn't want to say it but have to agree The rusty's dont do the job justice

 

[SlvrSnake]

Yeah the bolts aren't looking so great. I am thinking about replacing them but for now they will have to do. Just don't feel like screwing with it right now. I initially had to put them on twice b/c they were not coated when I first installed them. I'll do it eventually.