Grill help please

[shorty]

I bought these grills from SRTShelton and he sent no hardware to mount the things. He is not responding to my PM's, may be out of town, but none the less I can't figure out how to install. No name on them as to manufacturer so I really need so suggestions as to how to locate the right mounting hardware. Any help will be greatly appreciated.

 

[hawk02]

Those are the lower billet grills?? If so you have to remove front bumper cover to remove your OE black plastic ones then these use bar brackets to install......PITA really.

 

[shorty]

Those are the lower billet grills?? If so you have to remove front bumper cover to remove your OE black plastic ones then these use bar brackets to install......PITA really.

Actually these are the upper set of 4 grills. He "forgot" to send the lower 2 that replace the black on the bottom of the bumper. These fit perfectly but no way to secure. Thanks for the input.

 

[VPRPWRD]

Shorty, can you take a couple more pics of the back side of the insert? Are there any tabs on the back side? I installed street scene inserts in my truck and used zip ties to attach them to the grill shell through the holes that the mounting pin holes that attached the stock grills.

 

[shorty]

Shorty, can you take a couple more pics of the back side of the insert? Are there any tabs on the back side? I installed street scene inserts in my truck and used zip ties to attach them to the grill shell through the holes that the mounting pin holes that attached the stock grills.

Left them with VEWNOMOUS1 but no sir, there are no taps whatsoever. Just the two bars that connect the horizontal bars together. We looked at overlaying them but that really looks crappy. Called a vendor and said their were overlaid with hardware but would not sell the hardware separately. I will get Scott to shoot a pic or two and post. thanks for the help

 

[VENOMOUS1 RACING]

Here ya go Shorty! Apparently they were zip tied to old grilles but that looks like caca! We tried, lol

 

[VENOMOUS1 RACING]

 

[VENOMOUS1 RACING]

Anyone have a pic of clips to be used to install these?

 

[hawk02]

I had those on my old ram 1500 but there were 4 holes in the 2 vertical bars that had a screw through to a bar behind to anchor it to. Can't see how these go.............

 

[hawk02]

This is the only pic of them I could find, sorry:dontknow: