Handeling/Traction

[CubanEvo]

Ok its time. So I have decided to start doing a suspention setup on my truck but i wanted to get some input on what i should get. This is what I was thinking on getting


1. X-Metal Drop
2.Calvert Racing Traction Bars
3.JMB Traction Package - Stage 3?- Not sure yet because of the price.

I was told to get these to..

4.Swaybar Endlinks for Lowered Suspension - Front
5.Swaybar Endlinks for Lowered Suspension - Rear

So would this be the way to go, and what else do i need.:rock: :rock: :elefant:

 

[ZCx]

looks like ya got all the bases covered. thumbs up

 

[1qksrt]

Looks like you got it pretty well covered,
Add a set drag radials and your good to go!!

 

[JMB Justin]

If you get caltracs you dont need my Stage 3 setup, just get all 5 shocks and you'll be set.
Justin

 

[LitemUp]

If you get caltracs you dont need my Stage 3 setup, just get all 5 shocks and you'll be set.
Justin

Exactly what Justin said you could either use the caltracs and the 5 QA1's, or JMB Stage 3.

 

[QuickSilver]

Ok its time. So I have decided to start doing a suspention setup on my truck but i wanted to get some input on what i should get. This is what I was thinking on getting


1. X-Metal Drop
2.Calvert Racing Traction Bars
3.JMB Traction Package - Stage 3?- Not sure yet because of the price.

I was told to get these to..

4.Swaybar Endlinks for Lowered Suspension - Front
5.Swaybar Endlinks for Lowered Suspension - Rear

So would this be the way to go, and what else do i need.:rock: :rock: :elefant:

This would be the basics......if your supercharged, your going to need MORE! :elefant:

Quick

 

[FATJACK]

Start with the X-Metal drop, then you will know what extras you need.
Mine aligned great with no other extras...

 

[mauiSRT/10]

Start with the X-Metal drop, then you will know what extras you need.
Mine aligned great with no other extras...

Good advice!!!

Start with Boomers drop, then later you can determine if you need Caltracs and or JMB's setup.

patrick

 

[CubanEvo]

What is better Caltracs or JMB stage 3

 

[JMB Justin]

Depends on who you ask, JMB's kit has the 60' and 330' record in an SRT-10 (sub 1.6 and 4.3)
Justin

 

[ZCx]

sounds like cal tracs & JMB's shocks is a winnin combo. love my cal tracs.

 

[FSTJACK]

Have Justins clamps & Caltracs

I have had Caltracs for about a year. I am very pleased with them.

However I added Justins spring clamps.

What an improvement in traction, handling and hookup.

I would reccomend both from personal experiance.

 

[MYTRAM]

Did you install both at same time or did you add clamps a bit after cals? Wondering how noticable the diff is (if any) w/clamps added to cals over just the cals.