Has anyone installed JMB's tow hitch?

DevilDawg3097

New Member
Supporting Member
Joined
Jul 29, 2008
Messages
3,863
Reaction score
3
Location
Windy City
I should be getting mine soon :elefant: and was wondering, what is all inolved? do I have to take the bumber cover off?
 
Thats probably the only part I haven't bought from Justin. I have a Mega Cab for towing. The only trailer I own is a 26 foot car hauler.
 
Not sure. I would ask him.
If it is like the mopar one, the bed comes off (or jacked up at least)
 
From his website:

This package uses all MOPAR brand parts for an
OEM quality installation. Includes the trailer hitch
reciever, wiring harness to convert your existing
4 pin connector to a 7 pin, and a bracket to hold
the 7 pin connector. Requires minor notching of
the bumper underneath the factory hitch "plug",
notching would be hidden if plug was installed.
Fits all SRT models.

There was an install thread on the Mopar hitch somewhere......
 
I have the Mopar OEM version. Pretty straight forward. No drilling, lifting of bed etc. Hardest part was taking off the side cladding...lift up to unclip. When re-installing I put some masking tape down to protect the paint just in case.
 
DevilDawg3097 said:
I should be getting mine soon :elefant: and was wondering, what is all inolved? do I have to take the bumber cover off?

Did you already order it? If not don't, I've got the factory setup in my basement right now and I have no intention of putting it back on.
 
DevilDawg3097 said:
Thanks guys, it took about an hr:rock: Thanks Justin:elefant:

Good to hear :rock:
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top