Help..... Clucth ticking

[Bonkers]

I installed the package I got from Roes racing yesterday and now when I lightly hit the clutch pedal I get a clicking noise from the clutch.
I am a pretty good mechanic and even work on heavy equipment .
What I installed from them was that flywheel, centerforce clucth and the updated hyd package from them..
I took it back apart this morning and can not find anything out of place..

Any ideals?

 

[SilvrSRT10]

Might be the throwout bearing. Does it vary with engine RPM?

 

[Bonkers]

Yea the ticking goes with rpm's ...
Well here is a update ....
Took it all apart again today and checked everything.
Did not find a thing wrong so i put it back together again ..
I don't have the driveline back on yet or some of the other little stuff and started it up ..... No noise now ....
Going to finish getting it together and I will let you know ..

Wish me luck lol

 

[Bonkers]

Well not sure what i did ..but its all working now

 

[Bonkers]

Ok somthing new.....
When I rev my motor with the clutch pushed in it freaks some....
When the rpm's start to drop the tack freaks and it tries to die..
But if I don't push in the clutch the truck revs great..
It drives nice with no noises now.

 

[Bonkers]

Ok it tosses a code at me now .. P0320-NO CRANK REFERENCE SIGNAL
Now i never got this before on my truck ..
I clear it and i can sit a rev it all i want and it does not come back ..
But if i push in the clutch and rev it ..pop it freaks out the tack and tries to die and turns on the check engine light with that code ..

I just instaled the lighter flywheel kit ...think lighter is bad?

 

[mauiSRT/10]

I have the same flywheel with no issues in 4 years.

patrick

 

[SilvrSRT10]

Ok it tosses a code at me now .. P0320-NO CRANK REFERENCE SIGNAL
Now i never got this before on my truck ..
I clear it and i can sit a rev it all i want and it does not come back ..
But if i push in the clutch and rev it ..pop it freaks out the tack and tries to die and turns on the check engine light with that code ..

I just instaled the lighter flywheel kit ...think lighter is bad?

Have you pinched a wire somewhere that is aggravated only when you push the clutch in?:dontknow::dontknow:

 

[Slitherbeast]

Check you crank position sensor. Or your harmonic balancer is loose,might be falling off.