Help with switch covers, Please

[tinygiants]

I want to use these covers in my line lock and nitrous install. But I want to get them labeled and lighted. I am asking SLH if he can engrave the labels in them. Now I need to learn how to install leds in the covers. Any ideas on how to install leds? Suppliers?

I will likely use led tipped switches as well, but I want the covers to be lighted when the systems are off. I will probably tie into the interrior light system, so they are on when the dashlights are on.

Thanks in advance for all the help.

 

[belgiumbarry]

are you blind :dontknow: ............................

 

[tinygiants]

I want them labeled at night.

 

[tinygiants]

http://www.plasmaled.com/5mm8mmled.htm This may be my solution. They come with the resistor already installed.

 

[Ram From Hell]

Dale, I got the LEDs in the dash top cluster from Jegs with leads and resistors built in. The two larger red ones next to the AEM gauges were from Radio Shack, also with resistors built in. There were plenty of different styles and colors too.

I'm sure you could find something there that will work for you.

 

[tinygiants]

Dale, I got the LEDs in the dash top cluster from Jegs with leads and resistors built in. The two larger red ones next to the AEM gauges were from Radio Shack, also with resistors built in. There were plenty of different styles and colors too.

I'm sure you could find something there that will work for you.

Thanks Eric. I was going to have to buy 20 from the mail order place.