Holset Turbo for sale

[DevilDawg3097]

Brand new turbo from an 8.3l cummins for sale only ran ten mins berfore being removed, due to the motor's cam was bad but so was the turbo so had to change out anyway. Will post picks later. brand new $1300. $700 shipping included. Let me know cleaning out the garage:marchmellow:

And yes those with the 5.9 cummins it will work really good on there.

 

[DevilDawg3097]

Here are some pics of what it looks like (not the one I am selling this was the one with the new engine. It will work on out truck it is comparable to a garret 76 I believe or bigger. I was gonna use it till I got a roe. But it would alos be a good upgrade for 5.9 also.

 

[BDR SRT-10]

Does one just replace the stock hx-35 unit for this one and go on a 2000 5.9 CTD?

 

[DevilDawg3097]

Does one just replace the stock hx-35 unit for this one and go on a 2000 5.9 CTD?

it should its a t4 flange so it will mount right up, the only thing i think may be different is the down pipe flange i beileve it is 3.5. like i have told others this thing is capable of up to 70% boost it is the motor you have to worry about handling it:burnout: :burnout:

 

[BDR SRT-10]

Hmmm, well I have a custom exhaust on mine already with a 4" down pipe off the turbo... I assume you would have to have a chip or programmer for this turbo with bigger injectors too, to handle the extra boost?

 

[DevilDawg3097]

Hmmm, well I have a custom exhaust on mine already with a 4" down pipe off the turbo... I assume you would have to have a chip or programmer for this turbo with bigger injectors too, to handle the extra boost?

I would think just a programmer.Check out bulldog there pretty good.


Also dropped price to $600 bucks shipping included:marchmellow:

 

[BDR SRT-10]

Any more actual pics? Am considering this turbo... I need more proof or evidence it'll work on my truck safely and what all I would need to make sure and make it safe...

 

[DevilDawg3097]

Ill take some new ones now and post them.

 

[BDR SRT-10]

swell

 

[DevilDawg3097]

 

[DevilDawg3097]

you should not have to mod anything, the only thing I do suggest is a boost controller, because this will put out more boost than most stock motors will handle gas or diesel.

 

[BDR SRT-10]

Nice, thanks! Any close ups of the plate on the turbo? Not trying to be a pain, just wanna see for spec reasons... I'm curious how much boost I can push with this turbo safely above stock? I'm not looking for super hp/trq #'s here, just faster spooling, lower EGT's, and a bump in performance w/o damaging anything. I've already upgraded the 47re fairly well, re-did the fuel system, and have all my gauges plumbed and working.

 

[DevilDawg3097]

the numbers are
Cummmins
Kit#3802619RX
ASSY#3533010
Serial#m1276385

these are the 3 sets of numbers on the tag with this info any dealer should be able to tell you all about it . Any other questions just pm me.

 

[BDR SRT-10]

PM'ed

 

[DevilDawg3097]

bump,:marchmellow:

 

[DevilDawg3097]

I put it on ebay can get it little cheaper now heres the link.
http://cgi.ebay.com/ebaymotors/Holset-HX-40_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem190289886916QQitemZ190289886916QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


I popped my cherry:marchmellow: :rock: My first sale on ebay:slug:

 

[DevilDawg3097]

Bump $550 plus shipping.

 

[DevilDawg3097]

Bump $399 plus shipping. Boss says I cant buy anything else until I sell the shi..stuff laying around I havent used. Will work on 5.9 cummins and 8.3l cummins. PM any questions

 

[Dom426]

Bump $399 plus shipping. Boss says I cant buy anything else until I sell the shi..stuff laying around I havent used. Will work on 5.9 cummins and 8.3l cummins. PM any questions

hold it til wednesday and ill let you know for sure!!!!

 

[DevilDawg3097]

hold it til wednesday and ill let you know for sure!!!!

You got it.