How to bleed powersteering system?

[JTS VENOM PERFORMANCE]

Nice new name :rock:

thank you hunny


thought a little about this last night there mr # one fifty four, now as much modding as you have done under the hood, moving things around and such, why not do this, remvoe the oem hydraulic fan, and install a differnt electric set up. Justin has his available or I know as much wrenching as you do on those deeres, that a shroud fan set up could be done, and then we could do ya one line from the pump straight to the rack, right now , till i get things closed up, i dont have any time, these 3 am deals are killlin me
but getting close

 

[yellowfever#154]

thank you hunny


thought a little about this last night there mr # one fifty four, now as much modding as you have done under the hood, moving things around and such, why not do this, remvoe the oem hydraulic fan, and install a differnt electric set up. Justin has his available or I know as much wrenching as you do on those deeres, that a shroud fan set up could be done, and then we could do ya one line from the pump straight to the rack, right now , till i get things closed up, i dont have any time, these 3 am deals are killlin me
but getting close

Good idea darling, Ill talk to MR.JMB. I was up till 2 am last Saturday night getting the truck running and up again at 7 the next morning. I was totally dead tired at 4 pm Sunday. I dont know how ya can do it.

PS. Next time you refer me to John Deere your gonna get a white powder package in the mail,

 

[JTS VENOM PERFORMANCE]

Good idea darling, Ill talk to MR.JMB. I was up till 2 am last Saturday night getting the truck running and up again at 7 the next morning. I was totally dead tired at 4 pm Sunday. I dont know how ya can do it.

PS. Next time you refer me to John Deere your gonna get a white powder package in the mail,

 

[yellowfever#154]

I got it sorted out today. Underneath the fitting in the pressure side of the pump there is a spring and plunger. My plunger was missing, I stole one from Joes truck and tried it in mine and immediately had power steering and fan. Now just have to try and figure out where mine went to.

 

[JTS VENOM PERFORMANCE]

look in your sock drawer, stuff allways finds its way there:argh:

 

[sully1329]

Im bringing this one back!

Ive read this thread 30 freakin times and have looked all over online how to bleed it! And Ive removed and installed my pump about 8 times now! I had a leak so I took one off my wrecked truck and replaced it, no more leak. But still no power steering. I replaced the pump with the one from the wrecked truck. Still no power steering or fan. I lifted the front end off the ground and turned it prolly 30 plus times and nothing. No foamy bubbles or nothing. I cracked the lines going to the rack one at a time and just fluid leaked(i dont know which one is the high pressure but none of them had high pressure what so ever). I took the pump off and played with the pressure valve it was stuck down so I pushed on it and it came back up and worked fine so I put it back together and still nothing. I bleed the raditator and still nothing. I put the original pump back on and still nothing. Im pulling my hair out here! the only thing i havnt done yet is buy a new pump, but if the fan aint workn i dont want to buy a new pump. Unless the fan aint workin cuz both pumps are bad? Im lost!!! Think im going to go buy a new pump just so ill know that thats not the problem but ima be pissed if I have 3 freakin good pumps sittin in my garage!! ARRRG!

 

[yellowfever#154]

Do you have the plunger and spring under the fitting on the top side of the pump? I had the same problem as you and my plunger was missing. Once I got all the pieces in place it almost bled itself, it was very easy.