I did the GM solenoid Conversion

[bigike]

No change at all in my shifting. Not for the better or worse, even though it didn't tighten anything up i believe that it's going to be a much better part.

Oil was bad after 6,000 miles.

Next time i pull the pan i'll be installing a DTS valve body.

And I'd love to thank that last shop that installed the tranny for not looking at the 30" lbs recommendation for the drain plug. 1 twisted 3/16 snap on allen and 1 broken allen socket later, i'm really happy for the plug 1" up on the side!

I've only drivin it around the block, i'll get more info later.

 

[kickinassrt-10]

You might not notice the difference if you don't get on it...It allows the hydraulic fluid to flow better!

 

[blackviper]

Jay, the only benefit is that the shifts won't hang up at wide open throttle. The solenoid allows the fluid to flow better and doesn't let the line pressure go through the roof.

 

[bigike]

got to drive it today, it feels good. There was some garbage on the screen for the old solenoid.

 

[Rickspeed]

where did you get the kit?

 

[kickinassrt-10]

where did you get the kit?

Love your avatar man! Nice twins!! As for the solenoid You can get ahold of the guy that worked on my tranyy at Www.atfspeed.com or a few other trans guys around here.

 

[spray]

PATC done mine and also installed the big daddy drum

 

[1fast10]

Next time i pull the pan i'll be installing a DTS valve body. [/QUOTE]

as in cadillac dts