I have a question about fitment....

[ntw0rk]

The insert in the "hood scoop" on my truck doesn't fit quite right. The forward edge sticks up a little bit from the hood. Anybody know the best way to fix that? I tried tightening the "bolts" on the underside, but they don't seem too strong and I didn't want to over-tighten anything.

It drives me crazy! And I would love to be able to fix it...

TIA

 

[Texas Yellow Fever]

You're probably going to have to take it out and sand the underneath side to let it sit lower. That should work, but in case it doesn't, get a six pack of beer and a BFH and try that...

 

[ntw0rk]

You're probably going to have to take it out and sand the underneath side to let it sit lower. That should work, but in case it doesn't, get a six pack of beer and a BFH and try that...

Sounds like I will need a six pack either way...

Better start drinking now...

 

[DVSMAX]

There is a sponge/rubber strip under insert....it may be twisted. Carefull with clips at front - they seem to go flying wildly.

 

[Prof]

I would like to have a blank hole rather than the plastic mesh...but removing it leaves a very unfinished edge...

Getting a little crazy here...but I would like to have a black hole there...it would be better if there was a faint red glow from it, but I think LEO would not like me having a red light facing forward...

Anyone achieved a "black hole"???

 

[Begood]

I would like to have a blank hole rather than the plastic mesh...but removing it leaves a very unfinished edge...

Getting a little crazy here...but I would like to have a black hole there...it would be better if there was a faint red glow from it, but I think LEO would not like me having a red light facing forward...

Anyone achieved a "black hole"???

Yes. Look at the pic in my sig.

Bill.

 

[ViperJeff]

Getting a little crazy here...but I would like to have a black hole there...it would be better if there was a faint red glow from it, but I think LEO would not like me having a red light facing forward...

Like this Roy


http://s401.photobucket.com/albums/pp93/BENISASPUD/My%20Baby/?action=view&current=0314091853.flv

 

[Prof]

Wow, I bet that would piss off John Law...! I just want a faint glow...

Billy...I need you to do my hood intake, and my my rear tail lights...

Tell me what you want to do them...then I am going to ask Alex if she will cut a deal for me!

 

[viperhauler]

Like this Roy


http://s401.photobucket.com/albums/pp93/BENISASPUD/My%20Baby/?action=view&current=0314091853.flv

does that come with the talking casio, as well???

 

[Begood]

Wow, I bet that would piss off John Law...! I just want a faint glow...

Billy...I need you to do my hood intake, and my my rear tail lights...

Tell me what you want to do them...then I am going to ask Alex if she will cut a deal for me!

On my hood we just cut out the mounting tabs, and smoothed over the area, as for the tail lights there is a place just up the road from DTS that did mine for $75.00.

I think Alex will say, just have Chris and Alez go on a big shopping spree.


Bill.

 

[Coley 1334]

On my hood we just cut out the mounting tabs, and smoothed over the area, as for the tail lights there is a place just up the road from DTS that did mine for $75.00.

I think Alex will say, just have Chris and Alez go on a big shopping spree.


Bill.

it really looks alot better and isnt hard to do took me 30 min to cut sand and primer :rock:

(hey JimTeTe Sorry i cut your hood scoop up )

 

[SANCHOBA]

i have a 12" red neon tube behind my scoop...(set back so its not real bright).

 

[Prof]

i have a 12" red neon tube behind my scoop...(set back so its not real bright).

Do you have a night pic that you might want to share?