injecter help

[Tooloe]

can anyone tell me the size o ring is on our injecters?

 

[eddie102870]

dont know but i have a whole set of stock injectors if you want them only got about 15k miles on them.

 

[Bone]

[FONT=Arial,Helvetica][SIZE=-1]These are what I have now:
http://www.racetronix.com/images/injectors/S107.pdf


Part # INJ-GAS-0002 (S107FM)[/SIZE][/FONT]
[FONT=Arial,Helvetica][SIZE=-1]Static Flow Rate: 60 lb/hr @ 43.5PSI (300kPa) = 630cc/hr (sold as 65lb/hr by some vendors) [/SIZE][/FONT]
[FONT=Arial,Helvetica][SIZE=-1]Coil Resistance: 12.5 Ohms / High Impedance / High-Z(No ECM driver modifications required)[/SIZE][/FONT]
[FONT=Arial,Helvetica][SIZE=-1]Gain: 0.11ms/mg, Offset: 0.055ms, Turn on time: 1.14ms @ 14VDC, Turn off time: 0.85ms @ 600KPa

I have a set that came with my Roe SC I am not using now. I believe they are 49 lb injectors. Only 1500 miles on them.

I gave my stockers to Boomer.
[/SIZE][/FONT]