Inner tie rod mod

[autorodtechnologies]

I need shorter inner tie rods for my truck..
Does anybody know what material these are made out of?
If they are hardened?

I am thinking about taking them to a machine shop to get more threads added to the end and then shorten them a bit..

I think I need a little over .500

Another options is to find another tie rod with the same specs that is shorter..

I cannot find anywhere they show specs for inner8tie rod ends though..
I found a list of universal inner tie rod ends from moog but it skips around a lot and has a lot of holes..

The end that goes to the rack is a m24 thread and the other end is m18, stock length is 14.3

 

[bmxam962]

I had to cut mine down also. I now have no adjustment left. I think I may be able to get away with a thinner nut but may have to add threads to them also.

 

[autorodtechnologies]

was you're track width narrowed?
I'm 2" narrower on each side

 

[autorodtechnologies]

Actually mine are cut down now a little but the adjustment sleeve is bottoming out as well, I really don't want to have to cut that down too.