Install tips: Banssani headers coming

[dismist]

I have orderd O.M.E gaskets to go with headers. Should i also use the high temp silicone as well? What are the torque specs.? any oyher info i should know? Thanks

 

[TNVIPER]

just the OEM gaskets...no silicone or the gaskets supplied with the headers...I have had mine over a yr and 15K+ miles and have never had to tighten the header/head bolts..no leaks..

 

[dismist]

Any idea about how many pounds of tourqe?

 

[TNVIPER]

Cant remember but someone will chime in..

 

[SANCHOBA]

i would assume it would be the same for headers.....

TORQUE
DESCRIPTION (N·m) (Ft. Lbs). (In. Lbs.)

Bolts-A/C Compressor Mounting 23 - 200

Bolts-A/C Compressor Bracket 23 - 200

Bolt-Camshaft Position Sensor 11 - 95

Bolts-Camshaft Sprocket 23 - 200

Bolts-Camshaft Thrust Plate 24 - 210

Bolts-Connecting Rod Cap 68 50 -

Bolts-Crankshaft Main Bearing Cap (Refer to CRANKSHAFT - INSTALLATION)

Nuts-Crankshaft Oil Scraper 23 - 200

Bolts-Crankshaft Pulley 23 - 200

Bolt-Crankshaft Vibration Damper 176 130 -

Bolts-Cylinder Head (Refer to CYLINDER HEAD - INSTALLATION)

Bolts/Studs-Cylinder Head Cover 11 - 95

Exhaust Manifold 23 - 200

Exhaust Pipe to Exhaust Manifold 34 25 -

Bolts-Engine Mount Bracket-to-Block 41 30 -

Nuts-Engine Mount Insulator 102 75 -

Bolts-Flywheel to Crankshaft 75 55 -

Bolts-Generator Mounting 41 30 -

Bolts-Intake Manifold 11 - 95

Bolts-Oil Cooler 5 - 40

Oil Cooler Line Fitting 68 50 -

Bolts-Oil Pan
1/4–20 11 - 95

5/16–18 23 - 200

Plug-Oil Pan Drain 34 25 -

Plug-Oil Pressure Relief Valve 34 25 -

Bolts-Oil Pump Cover 23 - 200

Oil Pump Pick-up Tube

Bolt 1/4–20 11 - 95

Nut 5/16–18 23 - 200

Oil Filter 18 - 160

Oil Pressure Sensor 8.5 - 75

Oil Temperature Sensor 8.5 - 75

Bolts-Power Steering Pump Mounting 23 - 200

Bolts-Rear Crankshaft Seal Retainer 11 - 95

Bolts-Rocker Arm 35 26 -

Spark Plugs 27 20 -

Bolts-Starter Mounting 41 30 -

Bolts-Throttle Body 11 - 95

Bolts-Timing Chain Cover 23 - 200

Bolts-Water Pump Mounting 11 - 95
__________________

 

[TNVIPER]

i would assume it would be the same for headers.....

TORQUE
DESCRIPTION (N·m) (Ft. Lbs). (In. Lbs.)

Bolts-A/C Compressor Mounting 23 - 200

Bolts-A/C Compressor Bracket 23 - 200

Bolt-Camshaft Position Sensor 11 - 95

Bolts-Camshaft Sprocket 23 - 200

Bolts-Camshaft Thrust Plate 24 - 210

Bolts-Connecting Rod Cap 68 50 -

Bolts-Crankshaft Main Bearing Cap (Refer to CRANKSHAFT - INSTALLATION)

Nuts-Crankshaft Oil Scraper 23 - 200

Bolts-Crankshaft Pulley 23 - 200

Bolt-Crankshaft Vibration Damper 176 130 -

Bolts-Cylinder Head (Refer to CYLINDER HEAD - INSTALLATION)

Bolts/Studs-Cylinder Head Cover 11 - 95

Exhaust Manifold 23 - 200

Exhaust Pipe to Exhaust Manifold 34 25 -

Bolts-Engine Mount Bracket-to-Block 41 30 -

Nuts-Engine Mount Insulator 102 75 -

Bolts-Flywheel to Crankshaft 75 55 -

Bolts-Generator Mounting 41 30 -

Bolts-Intake Manifold 11 - 95

Bolts-Oil Cooler 5 - 40

Oil Cooler Line Fitting 68 50 -

Bolts-Oil Pan
1/4–20 11 - 95

5/16–18 23 - 200

Plug-Oil Pan Drain 34 25 -

Plug-Oil Pressure Relief Valve 34 25 -

Bolts-Oil Pump Cover 23 - 200

Oil Pump Pick-up Tube

Bolt 1/4–20 11 - 95

Nut 5/16–18 23 - 200

Oil Filter 18 - 160

Oil Pressure Sensor 8.5 - 75

Oil Temperature Sensor 8.5 - 75

Bolts-Power Steering Pump Mounting 23 - 200

Bolts-Rear Crankshaft Seal Retainer 11 - 95

Bolts-Rocker Arm 35 26 -

Spark Plugs 27 20 -

Bolts-Starter Mounting 41 30 -

Bolts-Throttle Body 11 - 95

Bolts-Timing Chain Cover 23 - 200

Bolts-Water Pump Mounting 11 - 95
__________________

Showoff....

 

[SANCHOBA]

hey, gotta' CHIME when ya' can