Sharpimage
Full Access Member
Hey folks, i'm in the middle of installing a AEM meter and i need some help
I took a picture of some wires i plan to splice into. But i need some
help identifying what colors mean what..
:dontknow:
Also, the AEM fits pretty snug in the upper pod but the stock oil temp gauge
is somewhat loose.. how could i go about securing it in place? The stock
holder isn't really an option as it takes four screws and is just odd :dontknow:
Also, would i damage the gauge if i didn't connect the actual sensor until
later but applied power to the gauge now?
What's the best way of routing the wire to the outside of the vehicle? It
looks like i need to take the dash apart but Tony told me i didn't have to? :dontknow:
Regards,
Andrew
I took a picture of some wires i plan to splice into. But i need some
help identifying what colors mean what..
![100_2788.jpg](/proxy.php?image=http%3A%2F%2Fi90.photobucket.com%2Falbums%2Fk264%2Fsharpimage%2Fgauge%2520install%2F100_2788.jpg&hash=d096de5ee3716eaa69d6aa1c84af481b)
:dontknow:
Also, the AEM fits pretty snug in the upper pod but the stock oil temp gauge
is somewhat loose.. how could i go about securing it in place? The stock
holder isn't really an option as it takes four screws and is just odd :dontknow:
Also, would i damage the gauge if i didn't connect the actual sensor until
later but applied power to the gauge now?
What's the best way of routing the wire to the outside of the vehicle? It
looks like i need to take the dash apart but Tony told me i didn't have to? :dontknow:
![100_2789.jpg](/proxy.php?image=http%3A%2F%2Fi90.photobucket.com%2Falbums%2Fk264%2Fsharpimage%2Fgauge%2520install%2F100_2789.jpg&hash=c444c51bfda383bbca89d096fd34a83a)
Regards,
Andrew