iron ten question

[Ironhead]

ok latley i have noticed on my old 3/4 ton v10 magnum that on the hose coming off passenger side valve cover had some oil all over it ,,i took it off and with engine running i get a good bit of air presure blowing out the hose ,,spits out some oil mist with it too ,,so i took hose off drivers side to compair and i get almost no air coming out ,,,,

this is a new on on me ,,am i getting some blow back on passenger side or what ??still runs ok no codes or anything :dontknow: :dontknow:

 

[HaroldD]

:dontknow: Ring blowby and driver's side oil return areas partially blocked? The blowby pressure will look to get out via the path of least resistance.:dontknow:

 

[Prof]

Sounds like blow-by to me...do a compression check and a leak down...just to be sure that you don't have a ring issue.

 

[Ironhead]

checked compression ,,that looks good ,,,leak down i dont have junk to do it ,,,:dontknow:

 

[includemeout]

Don't no the year, but does it have a clogged PCV valve or hose ( if it has one)?????

 

[GADodgetech]

Sounds like your intake gasket

 

[TNVIPER]

Dont take the hose off anymore and it wont blow oil...:dontknow: ......

 

[Ironhead]

Sounds like your intake gasket

tell me how that would cause pressure in basiclly my valve cover ,,,,and i did notice pressure goes up when i give it gas ,,not a lot but its a good bit
some one at work tried to convince me i have a bent or bad valve in head

 

[GADodgetech]

tell me how that would cause pressure in basiclly my valve cover ,,,,and i did notice pressure goes up when i give it gas ,,not a lot but its a good bit
some one at work tried to convince me i have a bent or bad valve in head

Sorry i read it wrong, I thought it was a suction.

 

[OSO]

ok latley i have noticed on my old 3/4 ton v10 magnum that on the hose coming off passenger side valve cover had some oil all over it ,,i took it off and with engine running i get a good bit of air presure blowing out the hose ,,spits out some oil mist with it too ,,so i took hose off drivers side to compair and i get almost no air coming out ,,,,

this is a new on on me ,,am i getting some blow back on passenger side or what ??still runs ok no codes or anything :dontknow: :dontknow:

Plug the hose up dumb ass , problem solved!!!! Fu<king people need help for the dumbest shyit!!

 

[includemeout]

You need a vacum gage
How To Read Your Vacum Gage
http://www.classictruckshop.com/clubs/earlyburbs/projects/vac/uum.htm

 

[Ironhead]

You need a vacum gage
How To Read Your Vacum Gage
http://www.classictruckshop.com/clubs/earlyburbs/projects/vac/uum.htm

i have no vacuum gauge ,,will ,,as soon as i get off work before 8pm this week

 

[includemeout]

i have no vacuum gauge ,,will ,,as soon as i get off work before 8pm this week

I have them mounted in my beater truck and the old motor home Old fashion, but, it lets ya know what is going on.

 

[OSO]

Here is a link to the a vacuum pump that might help you .





Relive pressure tools

 

[includemeout]

Here is a link to the a vacuum pump that might help you .



http://Relieve pressure.com/avt/

Hurry, send that link to Roy

 

[Cruster]

Don't no the year, but does it have a clogged PCV valve or hose ( if it has one)?????

That's the first thing I thought with no codes and good compression. :dontknow:

 

[Prof]

Hurry, send that link to Roy

They don't have one small enough

 

[SANCHOBA]

i can check mine and see what its doing.

 

[includemeout]

Here is a link to the a vacuum pump that might help you .

Relive pressure tools

Hurry, send that link to Roy

They don't have one small enough

i can check mine and see what its doing.

OMG!!!! -If you have to check it - it AIN'T doing much - I'm going to work now, I'll check progress later ...

Wifey

.

 

[SANCHOBA]

okay james....pulled both mine off. driver side has a slight vacuum and passenger side has no pressure/blowby. now remember i have a super charger,but at idle it shoudn't be any different. (damn thing on the passenger side was a mother) hope this helps.