IRONHEAD SCREWED BY JTSVP

[JTS VENOM PERFORMANCE]

Well we had a nice little yelling session with comp cams today

and this is jsut for everyones information database

the comp cams springs will not work without machinging the head

the comp cams roller rockers 1.6 or 1.7 will not work without machining the heads.

although harland sharp beefy roller rockers will fit without machining and fit under the valve cover.


James we will take care of the problem my little sweety

 

[FATJACK]

Beefy is good....

 

[Roz]

Beef? :eating:

 

[ZCx]

all i got is a ham samich :rock:

 

[Tooloe]

gah it says it on their web site that you have to machine the head! lol

 

[SilvrSRT10]

 

[04rcmoneypit]

IRONHEAD SCREWED BY JTSVP
??? Stinker, you can't take credit for that

 

[JTS VENOM PERFORMANCE]

gah it says it on their web site that you have to machine the head! lol

really?

http://www.compperformancegroupstor...duct_Code=1105-20&Category_Code=V10RockerArms

 

[Ironhead]

gah it says it on their web site that you have to machine the head! lol

only thing mentioned is that you have to do it for their springs,plus they are for a chevy 454 ,,, and stink i would have kept this under the table ,,,you did not have to tie yourself to the whippin post bud !

 

[Venom Power]

:laugh:HAHAHAHAHAHAHAHAHA... I knew Big Dave would come through for me.. LOL!

 

[JTS VENOM PERFORMANCE]

only thing mentioned is that you have to do it for their springs,plus they are for a chevy 454 ,,, and stink i would have kept this under the table ,,,you did not have to tie yourself to the whippin post bud !

it just really made me mad bud , especially after all the phone calls last week to them, and I knew aobut the springs and all, and ask them a TON of questions on the rockers, hours on hold and talking with them, then, then , they had the nerve to tell me today..........................they needed machining

but here is your new rockers:rock:

[/IMG]:rock: :rock: :rock: :rock: :rock: :rock: :rock:

 

[Sharpimage]

...you did not have to tie yourself to the whippin post bud !

We all know Tony loves that whip once in a while

 

[kyle's srt10]

it just really made me mad bud , especially after all the phone calls last week to them, and I knew aobut the springs and all, and ask them a TON of questions on the rockers, hours on hold and talking with them, then, then , they had the nerve to tell me today..........................they needed machining

but here is your new rockers:rock:

[/IMG]:rock: :rock: :rock: :rock: :rock: :rock: :rock:

Those should free up a few more ponys....:burnout:

 

[SilvrSRT10]

:laugh:HAHAHAHAHAHAHAHAHA... I knew Big Dave would come thorugh for me.. LOL!

You know I try to add a touch of humor where I can. All in good fun.

 

[Tooloe]

really?

http://www.compperformancegroupstor...duct_Code=1105-20&Category_Code=V10RockerArms

i'm pretty sure i read it on their website some where.. but none the less i know i was told over the phone that the heads would need to be machined...... o well looks great though!:rock:

 

[JTS VENOM PERFORMANCE]

i'm pretty sure i read it on their website some where.. but none the less i know i was told over the phone that the heads would need to be machined...... o well looks great though!:rock:

man I mulled over it everywhere before ordering and the bad thing bro....we even called tech before ordering them, and asked a bizzillion questions, i jsut got lucky enough to get a dumbass for a tech guy:argh: :argh:

but all is good , i got harland to make ironskittles a custom set of 1.6 rockers:rock:

 

[Prof]

Joanne loves seeing Tony strapped to the whipping post...and I think he gets a little kick out of it too!

If nothing else, Stinker is a stand up guy.:top:

 

[Tooloe]

man I mulled over it everywhere before ordering and the bad thing bro....we even called tech before ordering them, and asked a bizzillion questions, i jsut got lucky enough to get a dumbass for a tech guy:argh: :argh:

but all is good , i got harland to make ironskittles a custom set of 1.6 rockers:rock:

how much are those bad boys gonna open up hp wise?

 

[ViperTruck2933]

On the 2933 heads/cam build I used T&D Gen II rockers and LS1 beehive springs.

Very little work to make the Gen II T&Ds fit on the Gen III heads, just had to elongate the mounting holes just a tad.

 

[mysrt10]

On the 2933 heads/cam build I used T&D Gen II rockers and LS1 beehive springs.

Very little work to make the Gen II T&Ds fit on the Gen III heads, just had to elongate the mounting holes just a tad.

Do you still have a p/n for the valve springs?