Is there an Automatic Tranny that can handle 1000HP?

[robwclark]

Anyone know where to get a super-strong auto tranny for our trucks? What does that guy with the Silver QC with the world record have in his truck? I would consider a 3-Spd, but I sure would like an overdrive. The turbo setup in my truck is useless with a stick-shift. Every time I shift I lose boost, and it take too long to get it back. I wanna put it to the floor, and keep it there. Anyway, anyone have any idea what kind of Automatic Transmission swap I could do that will do OK???????

 

[TNVIPER]

Tony is working on just that.......though Dom is pushing 1600 ponys thru an auto....

 

[HV SRT]

Linco ?

 

[Yellow venom]

www.htstransmissions.com
Dusty Hawk will set you up with what works!!

 

[Bone]

Mine is 1400+ Torque

 

[DevilDawg3097]

Just a suggestion before you drop about 5k for a auto. 1st check your wastegate / bov and look for leaks. With twins no matter size you should be hitting boost around2k-2500. If your hitting over that again check for leaks,pin holes,slices anything. Also pwrshift leave your foot mashed on the pedal when shifting. Just some Idears.

 

[linemup]

Also pwrshift leave your foot mashed on the pedal when shifting. Just some Idears.

:rock: :burnout:

 

[JTS VENOM PERFORMANCE]

none that will be a decent daily driver, if thats what y ou want use common sense

 

[Slitherbeast]

trust the rev limiter and when it's time to shift don't lift!! takes a bit of practice .

 

[505'sFastestViper.]

www.mikestransmission.com


and it could be used as a daily driver with no problems....and its c]kind of fun because its full manual

 

[505'sFastestViper.]

http://www.mikestransmission.com/catalogsite400trans.html
i run the ultimate vasco with zero problems knock on wood

 

[Troy's QC SRT]

http://www.mikestransmission.com/catalogsite400trans.html
i run the ultimate vasco with zero problems knock on wood

What are you using to control it as far as computers

 

[Cruster]

trust the rev limiter and when it's time to shift don't lift!! takes a bit of practice .

POWERSHIFTING, OH YEAH! :rock: :rock: :rock: :rock: :rock:

 

[505'sFastestViper.]

What are you using to control it as far as computers

no computer its full manual and it has an air shifter thats set up with a window switch