amtrucker22
Active Member
It is time to sell the truck. Priorities change and this is just not in the cards right now. I don't mind parting out some of the mods I have so if you are interested in some of these items make it worth my while and we can work a deal. The big benefit of all of this is if you are coming down to the PCB GTG there will not be any shipping.
I am willing to sell the whole trucks for $25k with all items listed below. Truck has 62k miles on it. You will need to contact me quickly on this as some parts will be sold quickly.
I can get additional pictures if needed
All prices do not include shipping. The shipping will be the actual shipping cost. I will not be able to tell you cost of shipping until I go to FedEX/UPS/USPS.
Priority goes to people coming to the PCB GTG to avoid shipping.
This is also going to be listed on 2 other sites
Here are some of the items that I have for sale
-Venom wires and separators (new never used) - $115
PENDING-Brake Pedal (new never used) - $25
PENDING-Wrinkle Black battery tray box - Has a few holes in the top where a VEC 3 was mounted by a previous owner, but I would going to put some emblem on it, but never got around to doing it. It does have a Sneaky Pete pull on it though (this use to be Roz's) - $50
PENDING-Fascia saver (used) just bought this from Justin - $30
-Custom helper airbag setup for lowered RC. Just bought this from Justin. I verified with Stinker that this should work on QC's with his flip kit(or QC w/flip kit and 2-3" blocks) $125
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125
-Push to start button (original only used for the first 9k miles) - $35
-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
PENDING-JMB engine dress up kit (radiator and fuse box covers) - $45 (radiator piece has one small nick)
These items are pickup only and can be picked up at the PCB GTG.
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
-Fox box for 10's (kickers NOT included) - $90
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
-Mopar Fiberglass bed cover with a wing that has been cut to size - $500
-Drag Radials - $450
-Venom wires and separators (new never used PC is chipped in a few places very hard to see) - $115
-Brake Pedal (new never used) - $25
-Wrinkle Black battery tray box - Has a few holes in the top where a VEC 3 was mounted by a previous owner, but I would going to put some emblem on it, but never got around to doing it. It does have a Sneaky Pete pull on it though (this use to be Roz's) - $50
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. Plastic piece is broke but still works and the light still securely mounts to the truck - $125
-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
-JMB engine dress up kit (radiator and fuse box covers) - $45 (radiator piece has one small nick)
These items are pickup only and can be picked up at the PCB GTG.
-22" Boyd Coddington rims they are in good condition and just need a little cleaning/buffing ($400 + trade of stock rims in good condition)
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
at night
-Fox box for 10's (kickers NOT included) - $90
-Mopar Fiberglass bed cover with a wing that has been cut to size - $500
-Drag Radials (need to be cleaned and buffed) - $450
I am willing to sell the whole trucks for $25k with all items listed below. Truck has 62k miles on it. You will need to contact me quickly on this as some parts will be sold quickly.
I can get additional pictures if needed
All prices do not include shipping. The shipping will be the actual shipping cost. I will not be able to tell you cost of shipping until I go to FedEX/UPS/USPS.
Priority goes to people coming to the PCB GTG to avoid shipping.
This is also going to be listed on 2 other sites
Here are some of the items that I have for sale
-Venom wires and separators (new never used) - $115
PENDING-Brake Pedal (new never used) - $25
PENDING-Wrinkle Black battery tray box - Has a few holes in the top where a VEC 3 was mounted by a previous owner, but I would going to put some emblem on it, but never got around to doing it. It does have a Sneaky Pete pull on it though (this use to be Roz's) - $50
PENDING-Fascia saver (used) just bought this from Justin - $30
-Custom helper airbag setup for lowered RC. Just bought this from Justin. I verified with Stinker that this should work on QC's with his flip kit(or QC w/flip kit and 2-3" blocks) $125
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125
-Push to start button (original only used for the first 9k miles) - $35
-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
PENDING-JMB engine dress up kit (radiator and fuse box covers) - $45 (radiator piece has one small nick)
These items are pickup only and can be picked up at the PCB GTG.
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
-Fox box for 10's (kickers NOT included) - $90
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
-Mopar Fiberglass bed cover with a wing that has been cut to size - $500
-Drag Radials - $450
-Venom wires and separators (new never used PC is chipped in a few places very hard to see) - $115
-Brake Pedal (new never used) - $25
-Wrinkle Black battery tray box - Has a few holes in the top where a VEC 3 was mounted by a previous owner, but I would going to put some emblem on it, but never got around to doing it. It does have a Sneaky Pete pull on it though (this use to be Roz's) - $50
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. Plastic piece is broke but still works and the light still securely mounts to the truck - $125
-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
-JMB engine dress up kit (radiator and fuse box covers) - $45 (radiator piece has one small nick)
These items are pickup only and can be picked up at the PCB GTG.
-22" Boyd Coddington rims they are in good condition and just need a little cleaning/buffing ($400 + trade of stock rims in good condition)
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
at night
-Fox box for 10's (kickers NOT included) - $90
-Mopar Fiberglass bed cover with a wing that has been cut to size - $500
-Drag Radials (need to be cleaned and buffed) - $450
Last edited:
