JMB Justin...

[Nowwhat]

Killer vendor....

got 4 adjustable Qa1's ready to mount on the truck for a fraction of the cost Summit wants for one that stil has to be set up for the Ram....

So new super vendor....We also need:

1) a true grill set up...stainless steel mesh...
2) Leaf spring eliminator kits
3) lightweight driveshafts
4) ready to weld in cages..

lets go...:rock:

 

[Dominick572]

I Agree with NowWhat, Especially on the Grill Kits.

 

[Begood]

I ordered his RC traction kit and had it in less than 48 hours. Now that is what I call service.:rock:

Bill.

 

[Manic]

I ordered his RC traction kit and had it in less than 48 hours. Now that is what I call service.:rock:

Bill.

I guess the good news for you Bill is that you don't need to lift the truck to get underneath to install...

 

[JMB Justin]

Thanks for the compliments! A few questions:
-what are you looking for on the rear axle setup?
-The grills, are you wanting an oem match for the billet or something like a ferrari style mesh for everything (the interlocking wire, not screen or decorative metal from home depot). Like this:

-The stock driveshaft is pretty damn light! Are you wanting a carbon fiber setup?
-The cages I should be able to do, I have a air/hydraulic bender that will do anything up to 2" .125 wall.
Just curious on these, Im primarily a metal fabricator, but will wander from that some when the market has a big enough demand.
Thanks again Mike,
Justin

 

[NBT]

Thanks for the compliments! A few questions:
-what are you looking for on the rear axle setup?
-The grills, are you wanting an oem match for the billet or something like a ferrari style mesh for everything (the interlocking wire, not screen or decorative metal from home depot). Like this:

-The stock driveshaft is pretty damn light! Are you wanting a carbon fiber setup?
-The cages I should be able to do, I have a air/hydraulic bender that will do anything up to 2" .125 wall.
Just curious on these, Im primarily a metal fabricator, but will wander from that some when the market has a big enough demand.
Thanks again Mike,
Justin

That grill is sweet....keep us informed. Thanks for the order today Justin...awesome service....glad we have you here.:rock:

 

[Dominick572]

Thats really cool, Justin...

Just looking for something that looks good and gets rid of the plastic.

 

[Begood]

I guess the good news for you Bill is that you don't need to lift the truck to get underneath to install...

Hell I don't even have to lay down.

Bill.

 

[Niz]

I would like to see a billet grill that matches the stock spacing. So you would only need the lower facia and hood scoop inserts...

 

[FerrariTruck]

Thanks for the compliments! A few questions:
-what are you looking for on the rear axle setup?
-The grills, are you wanting an oem match for the billet or something like a ferrari style mesh for everything (the interlocking wire, not screen or decorative metal from home depot). Like this:

-The stock driveshaft is pretty damn light! Are you wanting a carbon fiber setup?
-The cages I should be able to do, I have a air/hydraulic bender that will do anything up to 2" .125 wall.
Just curious on these, Im primarily a metal fabricator, but will wander from that some when the market has a big enough demand.
Thanks again Mike,
Justin

I like this grill, i think its the only one i would switch out for

 

[RedRamRules]

I would buy the grill, put me down as a probable.

 

[Azmal]

I want this lower grill type. Can you make this?

 

[Nowwhat]

Justin....

yes that mesh grill for all 5 areas.....yes......yes.....yes....

Aluminum or CF driveshafts would be the ticket....

losing the leaf springs for coil overs would rock....

 

[Azmal]

And what about this.... It's an idea for a symmetrical look of dual exhaust without having to perform body work on the bumper, all you'd have to do is make a rough cut (on the left side of the bumper), and put the trim piece over the cut. I made a post with more details already somewhere if you.

 

[mauiSRT/10]

Killer vendor....

got 4 adjustable Qa1's ready to mount on the truck for a fraction of the cost Summit wants for one that stil has to be set up for the Ram....
...:rock:

Cant wait to hear the reviews Mike!!


patrick

 

[JMB Justin]

I'll look into the grill stuff very soon, I have to finish my mids first though before a couple people wring my neck LOL.

Azmal, I remember your post from before, I'll take a look and see if I can do something.

Nowwhat: are the QC driveshaft(s) steel? My RC driveshaft is very light aluminum, I was suprised at how little it weighed, especially for the size.

The coilovers in the back would be a full custom deal most likely, I can look, but I dont know how you would have a bolt in deal for something like that. It would be a better setup, but ALOT of fast cars are running leafs still.

 

[Black1]

That grill is sweet....keep us informed. Thanks for the order today Justin...awesome service....glad we have you here.:rock:

I agree.... That grill is SICK!!! :rock: :rock: :rock:

 

[SRT-IZ]

Doneo has this grill on his...He said its just mesh to lay concrete on so he used it and had it chromed...it looks sick!!

 

[Azmal]

Cool, he cut a vent in the fender... thats really awesome. I may have to do something like that

 

[harrisb]

Probably a stupid question, but how would you mount that mesh? I have a spot around here that sells all sorts of decorative mesh. If someone could assist me with how to mount this it may be fairly simple. I'm sure zip ties are possible but I was hoping for something a little cleaner. Is that the same thing you were thinking justin?