Lets see your gauge pods!!!!!!

[SRT-10 RAM VIPER]

guys lets see your gauge pods and set up with your gauges? also if anybody can chime in on how to put in the oil stock gauge into the tri pillar pod i see it has alot of screws in the stock pod do i have to add all the screws back in the tri pillar pod?? :dontknow::dontknow::dontknow::dontknow:

 

[amtrucker22]

The ultimate gauge setup in a 10...

 

[SRT-10 RAM VIPER]

for your oil temp gauge did u add back all the screws into the tri pillar pod cause it seems if u dont add them it feels that the gauge is loose

 

[mjd91]

You don't put the screws/bracket on the aftermarket pillar. If the gauge is loose you can put a rubber band around it to tighten it up.

 

[SRT-10 RAM VIPER]

where do i put the rubber band in the back of the gauge? is the bracket the one thats in color black?:dontknow:

 

[mjd91]

Yes that's the bracket that's black.
You shouldn't need a rubber band.
My stock gauge fit fine in my Autometer triple pod.

 

[SRT-10 RAM VIPER]

ok. do i have to disconnect the connector (where the wires are plugged in) so i can take the gauge out from stock pillar

 

[amtrucker22]

That wasn't my setup (Texas Yellow Fever). But I have had to add rubber bands to my a/f gauge in the past. It actually came with a black rubber band.

 

[SRT-10 RAM VIPER]

ok thought it was your set up :chain:

 

[amtrucker22]

Nah... That was a little of an overkill on gauges lol.

I had a triple pillar and that was about it.

 

[SRT-10 RAM VIPER]

do u got any pics of your gauges?

 

[amtrucker22]

Sure thing

 

[mjd91]

Yes you have to unplug the gauge to take it out.

 

[SRT-10 RAM VIPER]

Do I have to unplug it with a plain screw driver

 

[Yellow venom]

The ultimate gauge setup in a 10...

My truck looks very similar in gauges except I have two A/F on the steering colomn too, and three gauges on the middle of the dash between the steering wheel and the windshield also, I like lots of gauges so I know what's everything is doing and 9 more that I can watch with my Dash Daq that is suction cupped to the windshield on the left side, I can email someone a pic so they can post it for me.

 

[SRT-10 RAM VIPER]

Whats ur middle gauge for

 

[amtrucker22]

Whats ur middle gauge for

My middle gauge was a Autometer D-Pic. Gave you your 0-60, 60-0, 1/4 mile times ect...

It was really just a fun gauge, I am unsure of the accuracy.

Link --> ULTRA LITE D-PIC PERFMORMANCE GUAGE 2 1/16 - JTS Venom Performance

 

[amtrucker22]

My truck looks very similar in gauges except I have two A/F on the steering colomn too, and three gauges on the middle of the dash between the steering wheel and the windshield also, I like lots of gauges so I know what's everything is doing and 9 more that I can watch with my Dash Daq that is suction cupped to the windshield on the left side, I can email someone a pic so they can post it for me.

You can send it to me and I will post for you.

[email protected]

BTW... I have a Bassani exhaust coming for my GTO hopefully next week. Can't wait to get it on!

 

[amtrucker22]

Here is Joes gauges :rock:

 

[Yellow venom]

Thanks Paul.:rock: