lowering blocks

[moparmagic]

Thinking of just leveling the truck off and lowering the back end down 2" so thinking the blocks would be best? :dontknow: any suggestions on where to get them or not to get them? handling? problems? 'preciate all the insight you guys have

 

[moparracing]

talk to stinker......... :rock:

http://shop.jtsvp.com/main.sc;jsessionid=75BCA95CDF1148DA1EB8DF6BF23FBC40.qscstrfrnt02

 

[amtrucker22]

talk to stinker......... :rock:

http://shop.jtsvp.com/main.sc;jsessionid=75BCA95CDF1148DA1EB8DF6BF23FBC40.qscstrfrnt02

:dito: :dito:

 

[HOT RAM]

Talk to Stinker

 

[SilvrSRT10]

Just be aware that blocks only work on the RC (didn't see what you have). The QC either takes shackles or one of Stinkers lowering kits. But he can hook you up on the blocks too if you have a RC.

 

[SANCHOBA]

i went with 1.5" and it has a very slight rake (1/4" higher in rear) and was able to re-use the stock u-bolts.

 

[moparmagic]

I think I'll talk to stinker! :rock: and I have the RC so I'll figure it out again, I thought it was closer to 2" difference between the front and back, tks guys

 

[alexspop]

I think I'll talk to stinker! :rock: and I have the RC so I'll figure it out again, I thought it was closer to 2" difference between the front and back, tks guys

I've got a pair of 1 3/4" blocks that I'll let you have.

 

[HOT RAM]

I've got a pair of 1 3/4" blocks that I'll let you have.

:rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock: :rock:
:congrats: :congrats: :congrats: :congrats: :congrats: :congrats:

 

[moparmagic]

pm sent. This site and the guys on here rock! :top:

 

[alexspop]

pm sent. This site and the guys on here rock! :top:

Back at you.

 

[QuickSilver]

2"/blks. on the silver Truck....:rock: in my sig.

Quick

 

[alexspop]

The blocks are on their way bud. You should get them Tuesday or Wednesday.