need advice on a breathing apperatise

Ironhead

Ironhead

Full Access Member
Joined
Jan 14, 2008
Messages
11,306
Reaction score
1
Location
h-town
ok dont know if i spelled it right ,,apperatise ,anywho,,i need a breathering face mask that will keep out Flourine ,,,we are treating the inside of a bottle now that gets a blast of flourene in the molding process ,,somtimes the smell will knock you out !! so you see my need ,,,

Flourine is some wicked shit so i have to ask a couple of requests
#1- i need serious opinons not jokes on this guys ,,,thanks
#2- any non serious remarks please refer to request #1:D
 
Last edited:
Silverback said:
If you have access to oil free air from a compressor, then get a tombstone and a breathing mask.
Click to expand...
Agreed Dad, a positive pressure mask and a headstone made of plastic;)
 
Silverback said:
If you have access to oil free air from a compressor, then get a tombstone and a breathing mask.
Click to expand...


well we dont blast it straight ,,,it is a 20%flourine and 80% nitrogen,,,then we cut it down to 4% flourine and 86% nitrogen but its the mixing tank rooms and control room that gets me ,,,there is monitors in rooms that read its at a safe level but man i can smell it ,,,so im getting my own junk to wear when i go to record the settings ,,i and two other will have to alternate doing it ,,and its a once a day maybe 30 mins max ,,,but i had to change out a check valve in one of the control cabnets two days ago ,,,and i swear i was stoned off my ass for two days afterwards :p i even made the wife drive me to work for one day :dontknow:
 
Ironhead said:
well we dont blast it straight ,,,it is a 20%flourine and 80% nitrogen,,,then we cut it down to 4% flourine and 86% nitrogen but its the mixing tank rooms and control room that gets me ,,,there is monitors in rooms that read its at a safe level but man i can smell it ,,,so im getting my own junk to wear when i go to record the settings ,,i and two other will have to alternate doing it ,,and its a once a day maybe 30 mins max ,,,but i had to change out a check valve in one of the control cabnets two days ago ,,,and i swear i was stoned off my ass for two days afterwards :p i even made the wife drive me to work for one day :dontknow:
Click to expand...
Sounds like ya just need a good resperater with the proper filters:D
 
Try 3m.

They have a ton of different filters available.

Get a descent mask and just purchase the right filter.

Ebay will have the 3M mask the cheapest.

Then purchase your filters from 3M.

Just my $.02

SHU
 
Ironhead said:
ok dont know if i spelled it right ,,apperatise ,anywho,,i need a breathering face mask that will keep out Flourine ,,,we are treating the inside of a bottle now that gets a blast of flourene in the molding process ,,somtimes the smell will knock you out !! so you see my need ,,,

Flourine is some wicked shit so i have to ask a couple of requests
#1- i need serious opinons not jokes on this guys ,,,thanks
#2- any non serious remarks please refer to request #1:D
Click to expand...

I try not to correct petty shit like spelling (per se) unless it's against someone who should know better..... Shit becomes tedious when it has no caps, periods or any other structure.

FYI "apparatus" is correct...... I think....:dontknow:

D
 
Django said:
I try not to correct petty shit like spelling (per se) unless it's against someone who should know better..... Shit becomes tedious when it has no caps, periods or any other structure.

FYI "apparatus" is correct...... I think....:dontknow:

D
Click to expand...


as per my news years res. i have no comment to that un needed correction ,,,! but thank you for your input ,,,i think! i will breath better now for the info you have offered me.:dontknow:

please refer to request #1 ,,,heres your sign !
 
Last edited:
Now that you have a few serious answers, just hold yer dirty drawers over your ol ugly face:p :p :p :p
 
FATJACK said:
Now that you have a few serious answers, just hold yer dirty drawers over your ol ugly face:p :p :p :p
Click to expand...


and you have a nice day to young man :D
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

429.jpg
RPSS # 67 066
New hood
last pics 004
Back
Top