need alittle help

[Troy's QC SRT]

I need to take my front 02 sensors out and put bolts in there to fill the hole..... what size do I need and don't they actually make some kind of screw/ cap for what I need?
For those wondering why my 0402 code won't go away and I was told to just take them out and tie them up.

 

[wesalbert]

18 mm x 1.50 pitch? Anyone know if this is it?

 

[Silverbullet08]

^ Yep

 

[Troy's QC SRT]

Would autozone or napa sell like a 02 sensor plug....I'm wondering if just putting bolts would hurt anything with it being long and an obstruction in the piping so to speak

 

[ZCx]

I need to take my front 02 sensors out and put bolts in there to fill the hole..... what size do I need and don't they actually make some kind of screw/ cap for what I need?
For those wondering why my 0402 code won't go away and I was told to just take them out and tie them up.

is this for testin?????

the front ones are have to have & the back 2 can be hung or simulated???

yes, on the O2 plugs. maybe an exhaust shop????

 

[Silverbullet08]

Would autozone or napa sell like a 02 sensor plug....I'm wondering if just putting bolts would hurt anything with it being long and an obstruction in the piping so to speak

go to an exhaust shop. they gave me two for free

 

[VENOMOUS1 RACING]

DO NOT REMOVE THE FRONT O2 sensors!!!!!!

These are used by the PCM to correct A/F ratio!

The rears are the ones that can be hung to the frame and the plugs are available at any Muffler shop.

 

[amtrucker22]

I used these instructions for my rear 2 02 sensors and it fixed my code problems.

LINK

Costs about $4 from autozone