Need Some Help with a Code

[IH8CHVYS]

Well damn yesterday got in the beast to go for a cruise and my engine light came on so i went down to the local auto parts store to use there scanner.
Its coming back with the following code:
P0112
IAT Sensor 1
Curcuit Low Input
Can anyone help me out here please. Thanks

 

[Roz]

Did you recently unplug your IAT sensor? It may not have gotten plugged back in correctly. . .

 

[Prof]

Or the sensor could be bad. Did you do the Row IAT mod? (Addition of a 5-7 ohm resistor to the circuit???) If not when you replace the sensor do the mod...

 

[IH8CHVYS]

Did you recently unplug your IAT sensor? It may not have gotten plugged back in correctly. . .

LOL...... If i knew where it was i could answer your question!
Here i am showing off my mechanic abilities:dontknow:

 

[Roz]

The IAT sensor plugs into the intake "boot". The boot is the intake piece between the airbox and the throttle body. It's the only electrical connector in that location.

Hope this helps!

 

[IH8CHVYS]

The IAT sensor plugs into the intake "boot". The boot is the intake piece between the airbox and the throttle body. It's the only electrical connector in that location.

Hope this helps!

Ahhhh ok! Well i had it unplugged last weekend to install my catch can so i will do a little investigating, like you said maybe i didn't get a good connection when re-connecting it! Thanks

 

[FlyingLow]

Next time just instead of going to the parts store just turn your key off and on 3 times (leaving it on after 3). The code will show on the dash.