Need some more help...

[LitemUp]

As you all know I'm in the process of installing a water/meth injection system on my truck. I need to connect 2 wires to one of the injector wires use some wire splice connectors to get rpm signal to the controller. This is my dilema, I really don't cut any of the sheathing that is used to protect the wire near that injectors. Plus I think it would look really shitty. I'd tap into the wires near the PCM. Here is were I need your help. I need to know what color wires I need to splice into. Can someone provide me a list of wire colors by injector (for example: Injector #1 - yellow/blue). This is basically the last piece of the puzzle to the controller up and running.

Thanks for your help.

Alex

 

[pokeytemplar]

MODULE-POWERTRAIN CONTROL C2 (SRT) - WHITE 32 WAY CAV CIRCUIT FUNCTION
1 T54 18DG/OR (A/T) TRANSMISSION TEMPERATURE SENSOR SIGNAL
2 K26 18BR/YL INJECTOR CONTROL NO. 7
3 K115 18BR INJECTOR CONTROL NO. 9
4 K11 18BR/YL INJECTOR CONTROL NO. 1
5 K13 18BR/LB INJECTOR CONTROL NO. 3
6 K38 18BR/OR INJECTOR CONTROL NO. 5
7 - -
8 T118 18DG (A/T) GOVERNOR PRESSURE SOLENOID CONTROL
9 - -
10 K20 18BR/GY GEN FIELD CONTROL
11 T75 18YL/LB (A/T) TORQUE CONVERTER CLUTCH SOLENOID CONTROL
12 K58 18BR/VT INJECTOR CONTROL NO. 6
13 K28 18BR/LB INJECTOR CONTROL NO. 8
14 K116 18BR/WT INJECTOR CONTROL NO. 10
15 K12 18BR/DB INJECTOR CONTROL NO. 2
16 K14 18BR/TN INJECTOR CONTROL NO. 4
17 C240 18LB/TN HYDRAULIC COOLING CONTROL FEED
18 - -
19 C918 18BK/LB A/C PRESSURE SIGNAL
20 - -
21 T9 18DG/TN (A/T) 3-4 SOLENOID CONTROL
21 K333 18DB/LB (M/T) SOLENOID REVERSE LOCKOUT FEED
22 - -
23 G6 18VT/GY OIL PRESSURE SIGNAL
24 - -
25 T13 18DG/VT (A/T) SPEED SENSOR GROUND
26 - -
27 B22 18DG/YL VEHICLE SPEED SIGNAL NO. 1
28 T14 18DG/BR (A/T) OUTPUT SPEED SENSOR SIGNAL
29 T38 18YL/BR (A/T) GOVERNOR PRESSURE SENSOR SIGNAL
30 T515 18YL/DB (A/T) TRANSMISSION CONTROL RELAY CONTROL
31 F856 18YL/PK 5 VOLT SUPPLY
32 - -
Looking at the end of the connector with it facing you pin 1 is in the top right corner and 32 is bottom left.

I can send it to you in a spreadsheet to make it easier to read just PM me you email address.......