ARRESTmeRed04
Active Member
Just a tease, not photochopped, they fit with about 5 mins worth of grinding and are rock solid so far. Only been to 80mph so far but will be doing more testing this week
new front wheel package
- Thread starter ARRESTmeRed04
- Start date
Just a tease, not photochopped, they fit with about 5 mins worth of grinding and are rock solid so far. Only been to 80mph so far but will be doing more testing this week
jsandlin
Full Access Member
They are cute
:rock: What's the weight difference?
ARRESTmeRed04
Active Member
Just a hair over 100lbs
ARRESTmeRed04
Active Member
Will be running slick the same height as the front tires, yeah they are 15x3.5's, steering isn't very quick as the side walls are pretty soft but the brakes grab much faster/harder I'm assuming because they weigh so much less
That is a hell of a weight saving!!
ARRESTmeRed04
Active Member
Goes along with the other 100lbs I've takin off the front of the truck pretty well:burnout:
Just a tease, not photochopped, they fit with about 5 mins worth of grinding and are rock solid so far. Only been to 80mph so far but will be doing more testing this week
Nice job man
- Joined
- Mar 26, 2010
- Messages
- 7,442
- Reaction score
- 0
Looks cool.
luvsrt
Full Access Member
- Joined
- Apr 4, 2007
- Messages
- 116
- Reaction score
- 0
How? Did you put smaller brakes on it?
ARRESTmeRed04
Active Member
nope, had to grind the calipers just a bit though, no where near as much as fitting 16's on the rear though
FATJACK
Full Access Member
15x3 1/2...did you use adaptors???
ARRESTmeRed04
Active Member
yup, 1.5" thick.
ramsrt711
Full Access Member
What brand wheels and is it stock bolt pattern? Looks good.
VENOMOUS1 RACING
Has Left the Room - Banned from VTCOA!
Gonna look sick after a trimming of the coils and rear slicks! Gonna scoot! 11s are coming soon
- Joined
- Nov 1, 2009
- Messages
- 792
- Reaction score
- 5
Spidertrax spacers? If so I've got the same ones on my ramcharger 5x5.5 to 5x5.5 also have an old set of 5x5.5 to 5x4.5 or vise versa don't remember. They have been on the front for 4years with no problems. I had to use them cause I put a 97 ram diff in the back and wanted to keep the track width the same.
ARRESTmeRed04
Active Member
Not sure on the brand, found them on eBay but they are billet alum. I was worried about adapters at first but now after having then on for awhile I'm totally confident
They look like Weld wheels?? Look good with some wide matching rears!
ARRESTmeRed04
Active Member
Yup weld prostars, bogart makes a similar wheel I want to use on the rear
Support Us
Become A Supporting Member Today!
