New Hid Light Install, Headlamp flickering??? Help

Tito#14SRT

Full Access Member
Joined
Dec 29, 2009
Messages
1,150
Reaction score
0
Location
Tampa,FL
Have any of you guys had this problem...after Installing new HID lights for the Headlight and Fog Light....Speedo showing "Lamp Out" and the Headlights are Flickering?:dontknow:
 
I had this Installed between the Hid bulb and Ballast on the HID Kit before this one and it Eliminated the Problem.
Anyone else using this or had this same problem?? Thanks
2012-09-20202018_zpsb5dc0da5.jpg
 
Not sure this helps but i think you need some kind of relay . Is that it in the pic ?
 
Not sure this helps but i think you need some kind of relay . Is that it in the pic ?

yes the relay is wht is on the pic....I had it on and took it off:elefant: guess I will just plug it back in then
 
Yea I have the same problem. My moms gc srt8 does the same thing. I've seen that pretty much of dodge cars or trucks have that problem
 
you just need a load resistor i have 1 that went bad and i just ordered a brand new set sadly with these trucks you need 1 for each high beam and 1 for each low beam.
 
if you need a place to get them let me know i just ordered mine yesterday off amazon lol
 
if you need a place to get them let me know i just ordered mine yesterday off amazon lol

How much were they...ill let you kno gonna plug in the ones i had see if it does the trick if not ill order some new ones
 
yea you just need a resistor. Your truck is putting out 55watts for the headlights and the HID only take 35watts so your truck is sending out pulses to try and figure it out, this causing the flickering. There very cheap on ebay. Thats where i got mine and no problems.
 
Go to hidextra.com and get a pair of resistors...they are plug and play...you don't need a relay for the 04-05...only the 06 needs them with resistors... I had mine for almost 3 years with zero problems..
 
these are ones i just got and i give them credit for fast shipping already recieved them with standard 3-5day shiping (less than 2 days i had them) and these are for a pair

[ame=http://www.amazon.com/gp/product/B004EDF8HY/ref=oh_details_o00_s00_i00]50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights (Fix Hyper Flash,Warning Cancellor) : Amazon.com : Automotive[/ame]

you would need 1 set for each headlight unless like me you use LED's for turn signals in which case you need a 3rd set for that :) hope that helps you
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top