New to Forum with a tech question regarding rear end.

[DougW]

I have a RC rear end with a spun pinion bearing so I picked up a used QC rear and had it built and during installation discovered the Yoke is larger on the QC rear. My queastion is can I just swap the yoke off the RC rear end to the QC rear or do I run a hybrid U-joint? If it's just a swap of Yokes then I'm laughing, if not there may be a tear in my eye........

Thanks for the help.


Doug

 

[VENOMOUS1 RACING]

I have a RC rear end with a spun pinion bearing so I picked up a used QC rear and had it built and during installation discovered the Yoke is larger on the QC rear. My queastion is can I just swap the yoke off the RC rear end to the QC rear or do I run a hybrid U-joint? If it's just a swap of Yokes then I'm laughing, if not there may be a tear in my eye........

Thanks for the help.


Doug

Yes you can swap yokes bro but QC and QC have spring perches in different places? Did you change those?:ahhhhh:

 

[VENOMOUS1 RACING]

I'm sorry. Welcome to the VTCOA as well :rock:

 

[viperhauler]

yeah... how do you plan on bolting it up?

 

[ViperJeff]

Yes you can swap yokes bro but QC and QC have spring perches in different places? Did you change those?:ahhhhh:

is the QC aaaaaand RC? :ahhhhh:

 

[JTS VENOM PERFORMANCE]

I have a RC rear end with a spun pinion bearing so I picked up a used QC rear and had it built and during installation discovered the Yoke is larger on the QC rear. My queastion is can I just swap the yoke off the RC rear end to the QC rear or do I run a hybrid U-joint? If it's just a swap of Yokes then I'm laughing, if not there may be a tear in my eye........

Thanks for the help.


Doug

doug get a neaper u joint 1350/1410 about $30 the rc uses the 1350 the qc a 1410
then move the spring hangers ont he qc rear to bottom or flip kit it , easy deal,
need help shout

 

[ZCx]

welcome to the RBC:rock::rock::rock:

dam, learned something else bout our beasts:rock::santaclaus::rock::santaclaus::rock:

 

[Midnight Runner]

Welcome to the forum.

 

[DougW]

Thanks for the info guys. I'm good on the spring perches I just didn't realize they changed the yoke. Once I find the torque specs I can fix the problem and be back on the road.

Doug

 

[VENOMOUS1 RACING]

Thanks for the info guys. I'm good on the spring perches I just didn't realize they changed the yoke. Once I find the torque specs I can fix the problem and be back on the road.

Doug

250ft lbs sir

 

[VPRPWRD]

Welcome to the VTCoA! You have all the answers you needed from our vendors. Post up some pics of the truck when you get done putting it back together.

 

[Theol55]

Welcome to our Forum, Enjoy the stay!

 

[Privatetoe82]

Welcome to the forum! Good luck with the fix.


Sent from my iPhone using Tapatalk

 

[DougW]

250ft lbs sir

Thank you sir.

Doug

 

[06SRT10]

Welcome from Phoenix, Arizona.

 

[Arska2]

Welcome to the Red Button Club from Germany !