Oil Lines

[ViperCLKGTR]

Looking for a set of oil lines for our trucks. Just looking to see what's out there. I know about JTS's and Venomous's.

 

[VenomTruck]

Only other thing I've heard was to go to a hydraulics shop and have some made. But if you don't care about bling then just get tonys black ones, fair price and they will never leak.

 

[SRT2SLOW]

You can make your own for about 100..

 

[caveman]

You can make your own for about 100..

Probably closer to $80. There is a spare set of cores floating around somewhere too, so you can get duplicates made without having to take your lines off to have copy's made.

 

[VenomTruck]

ha, if you ever get near the carolinas gimme a shout, Ill make sure you dont have to make or overpay for anything.

 

[JTS VENOM PERFORMANCE]

purchase these
non crimped may eventually seep

but here is your parts list

4 an pump fittings, don't matter brand, make sure oringed, these are examples you will need 4 fittings

2 10 an straights

2- 10an 45 degree fittings for block side

a 19 inch section and a 21 inch section of 10 an hose

an wrenches if you need

http://www.summitracing.com/parts/sum-900101

and to not scar the fittings, an bench clamp inserts


to make
2 straight an fittings on one end, 2 45s on other end
install 4 pump fittings in cooler and block, install lines

 

[VenomTruck]

damn, a vendor telling you how to make them vs buying them from him, seems like the guy actually cares. Not a turd-head in my book

 

[JTS VENOM PERFORMANCE]

damn, a vendor telling you how to make them vs buying them from him, seems like the guy actually cares. Not a turd-head in my book

not like some think

gotta rock out an head to some fla R and R bo, later,
take care

 

[VenomTruck]

get kicked off some go karts and have fun :rock:

 

[ViperCLKGTR]

Heck Tony I was probably gonna end up getting yours anyways, never had a vendor tell me how to do it myself.... Only problem is I wonder if my imagination has the ability to do it myself... heck who am I joking I'll still probably get yours....

I'm gonna at least look into the doin it myself part.... AN pump fittings what size would I need?

 

[yellowfever#154]

I can make them for cheap and top knotch quality, send me a pm and we can make it happen

 

[hawk02]

Yes you can, just got my 10 back up and running and no leaks.......