P0138

[FlaglerSRT]

Hey guys please help last night after installing my clutch I threw a p0138 I pulled the ground cable it cleared and now driving to work this morning it came back. Please help I hate o2 codes they piss me off horribly!

 

[Slitherbeast]

Check to make sure the O2 sensor wiring is not damaged. Working on the clutch just prior probably has something to do with your problem. Go back under and confirm/plug /unplug the wires.

 

[VENOMOUS1 RACING]

Check to make sure the O2 sensor wiring is not damaged. Working on the clutch just prior probably has something to do with your problem. Go back under and confirm/plug /unplug the wires.[/


Make sure you don't have the right side front O2. Pinched between bell housing and block

 

[VPRPWRD]

Like the others have said, check and recheck the area you were just working in. If you didn't have a problem and now you do, 99% of the time it is something you touched.

 

[FlaglerSRT]

Ok guys great thanks I'll tear into it when I get the chance

 

[Slitherbeast]

I just loves teamwork!!:rock: