- Joined
- May 13, 2010
- Messages
- 323
- Reaction score
- 0
Installed JMB midpipes and got this code p0152.
What should i do next.
What should i do next.
p0152
- Thread starter sparksftball69
- Start date
P0152 HO2S Circuit High Voltage Bank 2 Sensor 1
It is very likely you have a bad oxygen sensor (shorted to internal heater element) if there is no rough running condition or any other noticable symptom.
Bank 2 is the LEFT side FRONT oxygen sensor.
Depending upon the exhaust system....there can be 4 oxygen sensors.......one ahead of the catalytic converter.......and one behind the converter. FRONT = ahead of the catalytic converter.
It is very likely you have a bad oxygen sensor (shorted to internal heater element) if there is no rough running condition or any other noticable symptom.
Bank 2 is the LEFT side FRONT oxygen sensor.
Depending upon the exhaust system....there can be 4 oxygen sensors.......one ahead of the catalytic converter.......and one behind the converter. FRONT = ahead of the catalytic converter.
Now that needs to be a sticky!!!
Support Us
Become A Supporting Member Today!
