P0320

[SRT-Great]

Has anyone got this error code before and know how to fix it.
I got it after hitting a highway turn at 55 when they post 20 :dontknow::dontknow: Anyways I had it, but I didn't see the loose gravel on the road and did a 180. Then enter error code. Also my oil pressure is reading 100psi at all times now.

 

[wesalbert]

http://www.vtcoa.com/forums/showthread.php?t=31834&highlight=P0320

P0320 Ignition/Distributor Engine Speed Input Circuit Malfunction

 

[TNVIPER]

Just disconnect your battery for about 10 minutes and it should go away.....if it does come back on you should take to dealer but I bet the battery disconnect will reset it and you will be OK..

 

[viperhauler]

http://www.vtcoa.com/forums/showthread.php?t=11

I posted anyways because I went through all the trouble on my phone to get the link and paste it

 

[wesalbert]

http://www.vtcoa.com/forums/showthread.php?t=11

I posted anyways because I went through all the trouble on my phone to get the link and paste it

P0320-NO CRANK REFERENCE SIGNAL AT PCM - SRT10

Yours is worded different than the link I posted :dontknow:

 

[viperhauler]

hmmmm...well...idk then?

 

[SRT-Great]

It took care of the check engine light, any ideas on the oil pressure always reading 100?

 

[phxpoolguy]

It took care of the check engine light, any ideas on the oil pressure always reading 100?

Maybe its stuck, try flicking it with your finger. That's what my gauge does sometimes.