Paxton install questions

[KyleB]

I have no desire to use the piggy back system that comes with it. Since my motor is stock and will be for some time, I am going to keep it at stock boost levels.

I'm planning on doing injectors, fuel pump, and a map sensor to avoid using the piggyback system. Curious what parts people recommended. I was going to link to Roe Racing's site at what I was looking at, but the site is currently down.

 

[NukeGM/Ford]

good luck with the upgrade, your truck is awesome and normally i don't like red

 

[VPRPWRD]

good luck with the upgrade, your truck is awesome and normally i don't like red

We are in agreement with this entire statement. Red is probably my least favorite color on these trucks.

SRT2slow had a Paxton on his truck, he may be able to help you out.

 

[SRT2SLOW]

Get 69lbs injectors
Walbro 400 pump. Just one
Gm 2 bar map sensor. The one from the neon is a direct bokt on but its not a 2 bar. Its a 2.25 bar .
Bigger heat exchanger
Sct
Wide band gauge
Fuel press gauge
You can ungrade to a tial bov. Sounds 100 times better than the one that comes with the kit
And have fun

 

[JMB Justin]

Agreed, we sell pretty much all of that as well

 

[Oggers]

With the fuel pressure gauge does it just hook it up to the fuel rail on the Schrader valve?

I'm just in the middle of this install
I've gone with 400 walbro pump not too difficult to drop the tank and fix it in the original basket.
2bar map sensor direct replacement.
Injectors 69lbs easy install
170 thermostat haven't done this yet.
Sct tune from Torrie when I get it all back together
Ive got a Aem wideband with boost in one to keep an eye on things

Charlie

 

[SRT2SLOW]

The oem srt4 map is not a 2 bar.

Summit racing sells an adapter that connects between the oem fuel line and rail in the stock location.

 

[Oggers]

Any links to the right product on summit?

Found some on nitrous express but is our fuel line a 8mm or a 10mm adapter

 

[KyleB]

You can ungrade to a tial bov. Sounds 100 times better than the one that comes with the kit

I was looking at the Vortech Max Flo Race BOV actually. I wonder how they compare sound wise? I obviously want to hear it.

My mustang had a Roush m90 on it stock that I had pullied to death, I loved the way that little blower screamed! That is the only compliant I have after swapping to a VMP TVS... It doesn't make a bit of noise.

 

[KyleB]

Agreed, we sell pretty much all of that as well

Well get me some prices sir

 

[KyleB]

What heat exchanger should I use? I saw some old threads that had custom inlets and custom intercoolers. What ever happened with that? Worth the trouble?

 

[KyleB]

Would this fit?
https://www.afcodynapro.com/AFCO/1385642677

http://smhttp.31006.nexcesscdn.net/80CDA9/magento/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/8/0/80275prob.jpg

It's for a Mustang Cobra

AFCO double pass heat exchanger with dual fans for '03-'04 Mustang Cobra. This unit is 31" W x 5 7/8" T and is 3" thick. It is an easy bolt-on installation and includes all necessary hardware and includes hoses and an installation manual. - See more at: https://www.afcodynapro.com/AFCO/1385642677#sthash.udaxonP0.dpuf