Pro Charger?s

[SRT-10 RAM VIPER]

Guys i have some ?s for the pro charger set up. What modifications do i have to do to my engine

 

[Dom426]

Rods and pistons or you can run the smaller one on stock internals until you forge your engine them turn up the boost.


Sent from my iPhone 6 while driving 100 mph on a dirt road

 

[SRT-10 RAM VIPER]

How much can the stock engine hold. I dont want to blow my engine. Also where can i get the basic pro charger

 

[bmxam962]

I recently just purchased a F1 kit from JMB to run on a stock motor set up. He says it will be fine for this running around 5-7psi should make between 600-640rwhp with a few other mods I am doing.

 

[bmxam962]

How much can the stock engine hold. I dont want to blow my engine. Also where can i get the basic pro charger

JMB performance sells a complete kit it is so sick in person. I was told to stay below 640-650rwhp would probably be safe and stay around 600rwhp.

 

[Dom426]

Link is in my signature bro ill be at his shop tomorrow we will FaceTime upu


Sent from my iPhone 6 while driving 100 mph on a dirt road

 

[hwmech]

If someone sends me a pro charger I will put it on my truck and I will tell you how many HP it puts out.

 

[Dom426]

If someone sends me a pro charger I will put it on my truck and I will tell you how many HP it puts out.

We will send you one tomorrow thanks for the amazing chance to put a pro charger on your truck

 

[SRT-10 RAM VIPER]

Jaja send ne one too bro lol

 

[SRT10VENOMOUS]

The procharger is sick. I love mine. Sounds just insane and more power available then you'll ever be able to get out of it. Unless u spend about 50\60k on the engine.

 

[yellowfever#154]

Yup, Procharger from JMB is the way to go!

 

[NSDQ]

I recently just purchased a F1 kit from JMB to run on a stock motor set up. He says it will be fine for this running around 5-7psi should make between 600-640rwhp with a few other mods I am doing.

How much was your kit out the door? I know it lists for $6999, but was there anything else you purchased, such as upgraded fueling or anything else?

 

[bmxam962]

How much was your kit out the door? I know it lists for $6999, but was there anything else you purchased, such as upgraded fueling or anything else?

upgraded fuel pump $175
injectors $600
Map sensor $18
Plugs $28
Coolant tank $70
I also bought a ATI balancer wasnt necessay but highly recommended $460

Rougly around $7891 with out ATI and $8351
the customer service and smile it will put on your face PRICELESS!!!!

 

[NSDQ]

Awesome man, thank you. And I respect you posting what you paid, a lot of guys won't. I would have PM'd you, but you don't have enough posts. And you're right man, Justin is top notch.

 

[bmxam962]

Awesome man, thank you. And I respect you posting what you paid, a lot of guys won't. I would have PM'd you, but you don't have enough posts. And you're right man, Justin is top notch.

Not a problem man glad to help in anyway I can but I pm all the time so no worries there any more info or pics just pm me if interested.

 

[yellowfever#154]

upgraded fuel pump $175
injectors $600
Map sensor $18
Plugs $28
Coolant tank $70
I also bought a ATI balancer wasnt necessay but highly recommended $460

Rougly around $7891 with out ATI and $8351
the customer service and smile it will put on your face PRICELESS!!!!

Did you cut keyways in the crank to utilize the ATI or did you buy the one without keyways?

 

[bmxam962]

Did you cut keyways in the crank to utilize the ATI or did you buy the one without keyways?

Going to cut Keyways have not gotten to install parts yet.

 

[yellowfever#154]

Are you going to pull the crank to do that? Kinda have too, but worth it for sure!

 

[SRT10VENOMOUS]

start with something like this and youll be good to go..

VS-1500 Short Block, 1996.5-2006, Viper Specialty Performance

 

[drumline99]

I need to move out of California or these guys need to make some smog legal kits.