PUSH RODS!!!

[faslane505]

damnit. got everything else lined up for the engine and in route...except for the pushrods...forget about em'


anyone got a set?

 

[fastestbrickonearth]

are you sure you need stock length push rods?

 

[sparksftball69]

What all are you going with?

 

[JTS VENOM PERFORMANCE]

the oem rods tend to flex at high rpm, most go with a hardened pushrod, most take a 7.600 pushrod, but you really need to have your engine tech measure to get the correct length

 

[fastestbrickonearth]

exactly

 

[faslane505]

actually just found out i have a set of comp cam hardened push rods from my last build that i thought i sold. they are 7.60", .080". thats what the marking on them say. my guy thats installing the engine said hes got the tool to measure them and make sure they fit.

 

[faslane505]

What all are you going with?

what do you mean? my engine combo?

 

[TNVIPER]

Josh if you need OEM push rods let me know before 8am tomorrow (Wed)...I can put them with the lifters w/o increasing shipping cost..

 

[faslane505]

Josh if you need OEM push rods let me know before 8am tomorrow (Wed)...I can put them with the lifters w/o increasing shipping cost..

im good bro...like i said found my old set of Comp hardend pushrods today..ironically about an hour after i posted that i needed some! thanks again g0ood sir