Pushrods

[axxel]

What is the size of the stock pushrods.
And what is a good replacement for them.

Thanks Alex

 

[Ironhead]

go to compition cams site ,,they have hardened pushrods in stock or custom lenghts

 

[Bone]

What is the size of the stock pushrods.
And what is a good replacement for them.

Thanks Alex

Big careful on the selection.

Mine were not what the manual stated, and it states a range. The correct way is to pull yours and measure with a micrometer. As I recall, mine were 7.65" not 7.602"-7.627" as the manual states. I know I posted on here about it.

Here it is:
http://www.vtcoa.com/forums/showthread.php?t=8000&page=2&highlight=rods

We had to send Eddie's back (a few years ago) since they were the wrong length too.

A few vendors carry them, Roe Racing for one. I think Stinker does too?

 

[axxel]

Thanks for the fast reply.
A forummember here in the netherlands has a bend pushrod and replace them with new stock ones.
He now wants better then the oem pushrods.

Alex

 

[FerrariTruck]

I think he has more promblems then just a bent pushrod

 

[yellowfever#154]

I think he has more promblems then just a bent pushrod

Exactly, what bends pushrods. Either valve spring pressures are too high for the pushrod used or a piston hit a valve.