QC Caltrac users help!

[amtrucker22]

Can you please measure the lenght of bar on your caltracs. I am pretty sure with mine adjusted according to instructions they only have a few threads left on the I bolt. Just wanted to make sure there wasn't a difference in the length of the bars.


THANKS!!!!

 

[amtrucker22]

Anyone????

Here is what it looks like:

 

[eddie102870]

thats what mine looked like with it lowered. check the other end make sure they are even on both ends

 

[amtrucker22]

they are even on both sides with about 2-3 threads left... Just makes me a little nervous...

 

[JTS VENOM PERFORMANCE]

the front pivot is the prob there paul, just got off the phone with them , now if I remember correctly your caltracs is actually for an RC correct?

the only difference in the two kits, is the QC has a different pivot in the front, u bolts, and lower plates.

now the problem you are having is the front pivot plates, I allready got a deal worked out for ya, so you can either pm or or call, but honestly havent been off thephone all day

but the bars are the same lenght ,

so jsut let me know sweetheart

 

[eddie102870]

ill bring you sumthing to fix it. takes care of the squeak too.

 

[perk_1405]

Anyone????

Here is what it looks like:

dang you already scratched that pretty red paint

 

[amtrucker22]

Doesn't take me long to screw up sumtin purty

 

[amtrucker22]

Thanks for the help guys. I changed out the front plates (thanks stinker) that changed the pivot angle and this worked (only got one side done so far). I will work on the other side tomorrow.

 

[EMT/SRT]

Thanks for the help guys. I changed out the front plates (thanks stinker) that changed the pivot angle and this worked (only got one side done so far). I will work on the other side tomorrow.

Paul, do you just try to tear things up on your suspension RIGHT before a GTG?

 

[amtrucker22]

Yeah, it sucks and I am tired. I am already a day behind on my cleaning schedule. One day I will get it right...