QC lowering kit intrest guage

[JTS VENOM PERFORMANCE]

The RC kits are almost done, I can do springs for the QC's if there is enough interested, and should be able to get a adjsutable flip kit for the rear.

Just remember I said this, "not responsible for vibrations"

there are two fixes for the QC vibrations.

1. caltracs

2. RC springs

but if there is enough interested I will have the springs two of our member so generously donated to have measured(thanks:rock: ) and have them speced the same as the RC springs
about 10-20% stiffer and about 1.5 inches lower
Jsut post yah or nah, you dont really have to go into detail ,

If you dont ever post, and are interested, jsut post a Yah yes , uh huh, whatever, or there may not be enough interest to do thesee

 

[bigike]

I will buy your qc kit time and funds depending. I'll buy the springs soon!

And I've got a guy waiting for your springs to finish his drop.

 

[JTS VENOM PERFORMANCE]

Cool beans bo, I will post everything on them probably monday night, or evening, Hot Ram likes them so far:rock:

 

[tinygiants]

yah if my rear is adjustable enough to match the lowered fronts.

 

[ChrisAZ]

If I keep my truck I will want to lower it and I have not seen any good options so far. So I guess that's a yes.

 

[amtrucker22]

Interested

 

[belgiumbarry]

QC ....nah....

 

[blackviper]

Sorry Stinker, I just bought an Xmetal 2/4 kit from another member that included Caltracs and the RC springs. I do think that a reasonably priced kit that would include everything would be of interest to many. I believe that people have shied away due to many reporting vibration issues.

Keep up the good work. It's awesome that you're coming out with a bunch of new products for our trucks.

 

[JTS VENOM PERFORMANCE]

Sorry Stinker, I just bought an Xmetal 2/4 kit from another member that included Caltracs and the RC springs. I do think that a reasonably priced kit that would include everything would be of interest to many. I believe that people have shied away due to many reporting vibration issues.

Keep up the good work. It's awesome that you're coming out with a bunch of new products for our trucks.

No worries bo, you got a killer deal on yours:rock: :rock:

and I is be alll bout savin the dinero

Yeah the vibrations fo a QC are usually very small, but soem people want absolutly none, and some get that, but occasionally there are a few trucks that just are born with it

The prob is that great big ol long two piece drive shaft

I cant guarantee no vibrations, just basically offer the same as what thhe others do, with better springs at more than likely a much better price

 

[ntw0rk]

I would be interested if the price is right!

Just don't know how soon I will be able to ante up!

 

[nwappleby]

xmetal or this?

 

[JTS VENOM PERFORMANCE]

I would be interested if the price is right!

Just don't know how soon I will be able to ante up!

no worries bo It will take them about a month to for them to get the springs, measure them, get the rate right, hieght, then make a first set, have it tested then it would be ready, so ya talkin probably two months or less

and its my kit newapplby, with custom springs

 

[CarolinaSRT10]

Stink,

I would like a 2/2 or 1.5/2 lowering kit.

Will yours do this??

Lee

 

[JTS VENOM PERFORMANCE]

If I get enough interest to send off a set of springs yes

 

[yellowfeverquad]

YEA QC LOWERING KIT

The RC kits are almost done, I can do springs for the QC's if there is enough interested, and should be able to get a adjsutable flip kit for the rear.

Just remember I said this, "not responsible for vibrations"

there are two fixes for the QC vibrations.

1. caltracs

2. RC springs

but if there is enough interested I will have the springs two of our member so generously donated to have measured(thanks:rock: ) and have them speced the same as the RC springs
about 10-20% stiffer and about 1.5 inches lower
Jsut post yah or nah, you dont really have to go into detail ,

If you dont ever post, and are interested, jsut post a Yah yes , uh huh, whatever, or there may not be enough interest to do thesee

YEA LET ME KNOW

 

[wesman]

Interested.....like noted before, for the kinda of coin that the kits are running, there shouldn't be issues with crappy shocks, excessive vibrations etc. Should be a simple bolt on and go application.

--wes

 

[FASTFOOD]

Yep yep yep yep yep yep
is that enough intrest?









yep yep yep yep yep
lil more just in case.lol

 

[GILMO'S10]

def would be interested to see what you come up with! Splain a little about the benefit of changing springs.thank's

 

[nwappleby]

YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

 

[JR_PRO]

I would be interested in a 1" drop front spring.

Thanks!