question

[SRT2SLOW]

ok...i just looked under my truck am i am leaking oil....it is coming from the oils fill cap....i just put a jmb intake with catch can.....i ran one tube from the from each valve cover and the into the catch can...i capped off the the original line under the intake manifold...did i do this right???? i had the k&n intake before this and never had a problem...the oil level is still good too....

 

[ZCx]

the oil cap o'ring is not real good sometimes.

as long as ya have no kinks in the JMB system lines, probably just the cap.

just a think, i run both the Roe breather & Justin's set up. no probs

 

[BLWNSRT]

There are replacement oil cap O rings there is a blue one a green on and another if I can remember there s a TSB on this the color is associated with the O ring thickness I bought both green and blue. Which ne input in I'd have to look.

 

[moparracing]

are you sure it isn't your oil cooler lines, stock ones leak:

http://www.vtcoa.com/forums/showthread.php?t=33660

oops, just saw your sig.

 

[SRT2SLOW]

it only started doing this after the jmb intake install....

 

[BLWNSRT]

Give your local dealer a call an get a replacement O ring should be the blue one and cost under $5. Maybe you bumped it installing the tube intothe valve cover or it was just coincidence it started to leak. Mine leaked from the day I got it with 9k.