rapor shift light again

[DRamSrt10]

i was reading the operating instructions and i realized there is no 10 cylinder selection modes? how do i set the cylinder selection for 10 (ram srt10)

 

[Dave T(BADVENM)]

Oops, made a mistake the first time. I believe the detailed instructions including how to set it up for the V10 are on the "other" site under FAQ (I think).

 

[SilvrSRT10]

I believe I remember someone saying to set it to (2) two cylinder.

 

[DRamSrt10]

well i found, it said "for dodge viper, the setting is 2 cylinder mode (signal off one of the 5 coil drivers)" what does that means??

 

[Dominick572]

thats correct, in the back on 1 2 3 leave the first two UP and the third DOWN.

 

[SilvrSRT10]

Check this out. I tells you where to find the wires to tap into.
http://www.raptorperformance.com/Dodge/Ramsrt10/ram_srt10.htm

 

[DRamSrt10]

ok but the paper said i should use 2 cylinder mode because it is for dodge viper too but it said first 2 down and one up?

 

[DRamSrt10]

Check this out. I tells you where to find the wires to tap into.
http://www.raptorperformance.com/Dodge/Ramsrt10/ram_srt10.htm

thanks! i did print it so i can use it to install it

 

[Venom Power]

I'm sure you guys ae way passed this point. But I figured I place it here to spread it around for those who will tackle this tomorrow and after.

http://www.srt10forum.com/forums/showthread.php?t=2524&highlight=RAPTOR

 

[Venom Power]

I'm sure you guys are way passed this point. But I figured I place it here to spread it around for those who will tackle this tomorrow and after.

http://www.srt10forum.com/forums/showthread.php?t=2524&highlight=RAPTOR

 

[DRamSrt10]

I'm sure you guys are way passed this point. But I figured I place it here to spread it around for those who will tackle this tomorrow and after.

http://www.srt10forum.com/forums/showthread.php?t=2524&highlight=RAPTOR

thanks! i did join srt10forum but i dont go there often because i went here more often

 

[Venom Power]

thanks! i did join srt10forum but i dont go there often because i went here more often

I went there often at one time until I (and plenty others here) were banished, never to return there... Wooptydoo.. I love my home here amongst the maniacs, enthusiasts, knighted knights, clowns, characters, creeps, a hairy ape and a very nice lady. VTCoA is the only home for me.

 

[DRamSrt10]

what did you do?? haha yeah same as me i love it here you all are like my family :rock:

 

[Stingray]

The reason that the 2 cylinder setting is used with the coil trigger is because the coil is fired 2 times per firing order. A fuel injector can be used as a trigger too, then the 1 cylinder setting is used.

 

[FSTJACK]

Thanks David

We can all thank David, Stingray for the installation Instructions and color pictures on the Raptor site and elsewhere.

I believe he was the first with that information and has helped us with many other installs and tech tips.

 

[WILDMAN]

Wildman

I posted a full set of instructions with pics a few weeks ago on one of the raptor threads. I got it from the other site.

Wade

 

[DRamSrt10]

I posted a full set of instructions with pics a few weeks ago on one of the raptor threads. I got it from the other site.

Wade

what is the link?