Raptor 660 stroker

[rare03srt10]

Just got done putting together my Raptor 660. Had the frame re powdercoated. Its got a 720 stroker crank, stage 3 hotcam, JE piston(i think its like 11.1 compression), Portflow competion port job(crazy porting with HIGH flow and nice set of valve train), stock carbs but with huuuuuge jetting, LTE duel exhaust, +4 front control arms, +6 rear swing arm, bearinger levers(clutch and front brake), yamaha r6 stock clutch(using half the springs), rebuilt and valved rear shock, all stainless steal break lines and a few other goodies.

Any who i recently found out im gonna be a Dad so im starting to think i might sell this and just buy a 450 or something that is gonna be stock and easier cause mixing race gas and stuff is expensive and getting to be a pain. Also its pretty much just setup to shoot the hill so trying to ride with everyone through the dunes is killing me lol What cha guys think would be a good price to list for sale?

 

[ZCx]

sounds badass/nice

links don't worky

 

[ZCx]

sweet:rock::rock::rock:

 

[wesalbert]

There ya go, moved to the top and cleaned up a bit.

 

[yellow446]

thats one nice ATV .. :rock:

 

[rare03srt10]

Thanks guys. I cant believe im accaully thinkin about selling it though....i bought this brand new in 2003 and had lots of fun with it, but over the past 2 years or so since i built the motor its gotten to the point where its more of a chore to bring it out and ride for the weekend then it is plessure. Im over 10k into it but im thinkin i can get 5k out of it or so still

 

[RAMDUDE]

Thanks guys. I cant believe im accaully thinkin about selling it though....i bought this brand new in 2003 and had lots of fun with it, but over the past 2 years or so since i built the motor its gotten to the point where its more of a chore to bring it out and ride for the weekend then it is plessure. Im over 10k into it but im thinkin i can get 5k out of it or so still

looks good man, good setup with the + swingarm and front arms.

I had a warrior years ago with a custom +16 swingarm and loved it for climbing hills, lot slower than this beast you have tho

which 450 you thinking about the honda or yamaha. they are badass stock as well.

goodluck with the sale.

 

[Midnight Runner]

Looks nice man.

 

[rare03srt10]

looks good man, good setup with the + swingarm and front arms.

I had a warrior years ago with a custom +16 swingarm and loved it for climbing hills, lot slower than this beast you have tho

which 450 you thinking about the honda or yamaha. they are badass stock as well.

goodluck with the sale.

+16 whoa?!?!?! that is huuge lol. Mine is setup for drag / i looove to shoot up the hill at the top of 3rd gear.

I wanna get a yamaha 450. All you gotta do it put a good intake, exhaust and a small cam adjustment and the rip. Best of all you run 91 octain. Mine runs on c16 so it gets expensive

 

[RAMDUDE]

+16 whoa?!?!?! that is huuge lol. Mine is setup for drag / i looove to shoot up the hill at the top of 3rd gear.

I wanna get a yamaha 450. All you gotta do it put a good intake, exhaust and a small cam adjustment and the rip. Best of all you run 91 octain. Mine runs on c16 so it gets expensive

Yeah the 450s roll out, I ran a slight modded one my friend had, jetted,exhaust,cam. I had the KFX700

he beat me

 

[rare03srt10]

Yeah the 450s roll out, I ran a slight modded one my friend had, jetted,exhaust,cam. I had the KFX700

he beat me

oh right on. Mine made 63 horsepower on stock carbs so i know i can make 70hp if i run FCR carbs i dont no talking about the bike makes me wanna keep it haha